Reliance UFH Heat Pump Underfloor Heating Kit Installation Guide
- June 9, 2024
- RELIANCE
Table of Contents
Reliance UFH Heat Pump Underfloor Heating Kit
The Heatpump UFH kit provides an easy and quick way to connect a heat pump to the manifolds feeding an underfloor heating system.
Reliance Worldwide Corporation (UK) Ltd
Reliance Worldwide Corporation (UK) Limited is part of the RWC group based in Atlanta, USA. This product falls within our Reliance Valves category, a global leader in the design and manufacture of water control valves. With group offices and manufacturing plants throughout the world RWC offers a wealth of knowledge and expertise which is reflected throughout our products. Being part of many specialised trade associations and having our own UKAS accredited laboratory, makes us at the forefront of any new regulations or changes which impact the industry, and allows for continuous product development and innovation, within our specialised product area.
General Info
The Reliance Heatpump UFH kit is a connection block for quickly and easily connecting heat pump systems to underfloor heating manifolds. The kit does not have any mixing or thermostatic capability, the flow that is supplied by the heat pump or other energy source is channelled directly into the flow manifold and the return flow is channelled directly back to the heat source. If it possible that the system water temperatures could increase beyond a safe level for the substrate being used then it is recomended that one of the RWC Thermomix or Thermoguard thermostatic mixing products be used instead.
Technical Specifications
Specifications
- Maximum temperature 85°C
- Maximum supply pressure : 6 bar
- Connections : Valve inlets 3/4” FBSP Manifold connections 1” MBSP
Materials
- Body Nickel Plated Brass
- Seals Fibre
- O-Rings Viton
Pressure Drop Graph
Dimensions
All dimensions in mm unless specified otherwise
Pack Contents
Please check contents of pack before beginning installation
- Heatpump UFH Connection Block
- Grundfos UPM3 Pump including cable
- Straight & Angled connectors for Thermoguard UFH valve
- 1” fibre washers (Qty 2) with straight connector tool
- Pump washers (Qty 2)
- Connection elbow
Introduction
Designed to work with manifolds of all types, on 210mm centres. The Heatpump UFH kit is a bolt on unit providing a quick and simple system to install.
Installation
Firstly firmly fix the distribution manifolds to the wall leaving enough room beside the manifold to fit the kit (see dimensions, Page 3). Before beginning the installation identify all of the components in the pack. The Heatpump UFH kit comes with two return ports. This means you can connect the main heating system return to either side of the valve, thus allowing the kit to sit on either side of the manifold.
Once the orientation has been determined the straight connector which connects the Heatpump UFH kit to the manifold needs to be screwed into the return port. This is tightened using the straight connector tool supplied.
The angled connector can then be connected to either the flow or the return port on the kit depending on the orientation of the supply pipework.
Connect the Heatpump UFH kit body to the pump using the pump nut which is pre- assembled ensuring the pump washer is inserted. Please take note of the directional arrow on the pump body.
Ensure the 1 ½” pump nut is fitted to the flow connection elbow. If not, this can be slipped over the flanged connection face.
Connect the nickel plated elbow to the pump using the 1 ½” pump nut, ensuring the pump washer is inserted. Tighten the pump union connections.
Connect the elbow to the flow manifold by means of the 1” MBSP connection onto the flat faced union connection, remembering to fit the 1” fibre washer.Connect the Heatpump UFH kit body to the return manifold by means of the 1” MBSP connection onto the flat faced union connection again remembering to fit the 1” fibre washer.
Thermoguard UFH Valve and Manifold orientation options:
Wiring
A fused spur should be provided adjacent to the manifold to provide power to the pump and two port zone valve if fitted. The pump is supplied with a plug- in cable for easeof installation. To comply with IEE regulations, the pump on the Thermoguard UFH Control Pack must be provided with an earth. All wiring should be undertaken by a qualified installer and must conform to IEE regulations.
Reliance Worldwide Corporation (UK) Limited Horton Road West Drayton UB7 8JL United Kingdom Tel: +44 (0) 1895 449233 rwc.co.uk
Reliance Worldwide Corporation (UK) Limited reserves the right to make changes to the product which may affect the accuracy of information contained in this leaflet. ZINS600001 – 02/20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>