VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera Instruction Manual

June 9, 2024
VIMAR

VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
logo

VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera

VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
product

AHD Day & Night Bullet Camera, 5 Mpx resolution, sensor 1/2.5”, mechanical IR filter, 2,8-12 mm varifocal lens, sensitivity 0 Lux with IR ON, IP66 protection degree, IR illuminator with range up to 30 m, Smart-IR, AHD-CVBS switching. Power supply 12 Vdc 400 mA, complete with bracket with protected cable passage. Weight 510 g.

Package content

After you receive your device, please check the following accessories. The pictures here are for reference only.

  Camera| Quick and start guide| Drill template| Viti Screws & spiles| Allen key
---|---|---|---|---
| | | |

Connections

Here below the main connections of the camera.VIMAR 4651.2812ES Elvox TVCC
AHD Day and Night Bullet Camera 06

Installation

Before start, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. Please install and use the camera in the dry environment. The mounting steps are as follows:

  1.  Drill the screw holes and the cable hole on the wall according to the drill template.
  2.  Route the cables and connect the power cable and video cable.
  3. Secure the mounting base with camera to the wall with screws as shown below.
    VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
07
    VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
08
  • DVR coaxial control:
    • Recall the PTZ menu of DVR.
    • Use Enter from OSD menu to enter in th camera menu.
OSD Menu

VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
09
VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
10
VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
11
VIMAR 4651.2812ES Elvox TVCC AHD Day and Night Bullet Camera
12

 Specifications

4651.2812ES

 Sensor| 1/2,5” – 5 Mpx CMOS
 Pixel image| 2592 (H) x 1944 (V)
 Sensitivity| 0 lux (24 IR led ON)
 Lens| 2,8-12 mm Obiettivo varifocale / Varifocal lens
Vision degree| 94 ° – 35 °
Video format| PAL / NTSC
 S/N Ratio| ≥ 42 dB
Video output| AHD / CVBS
 Fucntions| 2DNR, Smart-IR, BLC, D-WDR, AGC
 Day & Night| AUTO / COLOR / B&W / EXT
Range IR| 30 m
 Degree IP| IP66
 Storage temperature| -30 °C ~ +60 °C
Operate Temperature| -30 °C ~ +60 °C (IR OFF)
 Power supply| 12 Vdc ±10% – 400 mA (max)
Dimensions| 193 x 69 x 90 mm
 Weight| 510 g

Cautions

  •  Before operation, we strongly advise users to read this manual and keep it properly for using later.
  •  Please use the specified power supply to connect.
  •  Avoid from in correct operation, shock vibration, heavy pressing which can cause damage to product.
  • Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high grade furniture is applicable.
  •  Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this may damage the image sensor.
  •  Please follow the instructions to install the camera. Do not reverse the camera, or the reversing image will be received.
  •  Do not operate it incase temperature, humidity and power supply are beyond the limited stipulations.
  • Keep away from heat sources such as radiators, heat registers, stove., etc.
  •  This is product instructions not quality warranty. We may reserve the rights of amending the typographical errors, inconsistencies with the latest version, software upgrades and product improvements, interpretation and modification. These changes will be published in the latest version without special notification.

Installation rules

Installation should be carried out by qualified staff in compliance with the current regulations regard-ing the installation of electrical equipment in the country where the products are installed.

Conformity to Standards
EMC Directive. RoHS Directive
Standards EN 55032, EN 55035, EN 63000
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WEEE – User information

If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m2, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.

Privacy
Privacy Policy
As required by Regulation (EU) 2016/679 on the protection of personal data, Vimar S.p.A. guarantees that the electronic processing of data minimises the use of personal and other identification information, which is only processed to the extent strictly necessary in order to achieve the purposes for which it was collected. The personal information of the Data Subject is processed in accordance with the product/application privacy policy available on our website www.vimar.com in the legal section (Product – App Privacy Policy – Vimar energia positiva). Please remember that, pursuant to Regulation (EU) 2016/679 on the protection of personal data, the user is the controller of processing for the data collected during use of the products and, as such, is responsible for adopting suitable security measures that protect the personal data recorded and stored, and avoid its loss. Should the camera monitor public areas, it will be necessary to display – in a visible manner – the information about the ‘area under video surveillance’ envisaged in the privacy policy and specified on the website of the Italian Data Protection Authority (Garante). The recordings may be stored for the maximum period of time envisaged by legal and/or regulatory provisions in the place where the camera has been installed. If the regulations in force in the country of installation envisage a maximum storage period for the image recordings, the user shall ensure they are deleted in compliance with the applicable regulations.
In addition, the user must guarantee safe possession of and control over its passwords and the related access codes to its web resources. The Data Subject must provide the password for access to its system when requesting help from the Vimar Support Centre, so that the related support can be provided. Provision of the password represents consent for processing. Each Data Subject is responsible for changing the password for access to its system on completion of the work carried out by the Vimar Support Centre.’
Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals