Ksix BXPLAFLED01 Smartled Duo LED Panel User Manual

BXPLAFLED01 Smartled Duo LED Panel
User Manual SMARTLED
DUO LED PANEL User Manual
BXPLAFLED01

Technical information

Power: 24W
Luminous flux: 2450 lm
Color: Lower: CCT (Warm White + Cool White)
Upper: RGB
Temperature: 3000K­6500K
Lifespan: 20,000h
Voltage: 220-240V/50-60hz
IP54: Dust and water splash resistant
Dimensions: 42 x 3.5 cm
Connection: Bluetooth + WiFi
Voice Assistant: Amazon Echo and Google Home
App: TuyaSmart and Smart Life

Box contents

1 x Ceiling lamp
4 x Screws
4 x Wall studs
1 x User Manual

Installation

1. Disconnect the power supply.
2. Unscrew the bottom cover in the direction indicated.
3. Screw the bottom cover.
4. Connect the neutral cable and live cable according to the markings (L and N) to the terminal block connector on the ceiling lamp. Use a screwdriver to tighten the cables to the lamp.
5. Place the light body into the bottom cover in the direction indicated. Rotate the light body and install it.
6. Turn on the power supply and use the App Tuya to control the light.
   

Download the app

• To download the app, scan the QR code.
• You can also search the app in the App Store or Google Play.
  https://smartapp.tuya.com/smartlife
  https://smartapp.tuya.com/tuyasmart

Register

1. If you don’t have an account in the App, sign up and then sign in with the verification code.
2. Enter your email and click on “Get verification code”. Enter the verification code you will receive in your email.
3. Set the password and press “Finished” to complete registration.
   

Añadir dispositivo

1. First, turn on Bluetooth and WiFi on your phone.
2. Open the app and tap “Add Device” or “+” in the top right corner.
3. Select your smart device from the list of devices or use the automatic scan to find it directly.
4. Turn on the device and wait until it flashes by confirming and selecting the flashing type.

• If the device does not flash, restart it by following the steps detailed in the App: with the device turned off, switch on, then switch off, switch on, switch off and switch on again and the light will flash. In order for this process to work, it should be done in less than 10 seconds. Confirm and select the type of flashing. 5. Next, select the 2.4 GHz WiFi network, enter the router password and wait while the app finds the device. Add the device by tapping on the “+” symbol. Once it has been added, tap “Finished”.
  

Note

1. To ensure a correct synchronization with your mobile phone, it is necessary to accept all the accesses requested by the app.
2. To connect for the first time, you must be connected to a Wifi network. Make sure that the light is flashing quickly and that the WiFi password you have entered is correct. (The connection process may take several minutes, please be patient).
3. After the first connection, you can use a new WiFi or mobile data network to control the device at any time and from any location.
4. Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and IOS 8.1 and above. Do not use 5G WiFi.
5. The first connection should be made close to the router to ensure a faster connection. 6. When connecting multiple devices to the WiFi network, do not put them too close together as this may cause signal interference.

Control your device

• After successful configuration, the device will be displayed on the “Devices” page. Tap on the device icon to control its operation.

Colour selection

• Adjust the color, brightness and saturation of the rear light RGB colored light from the “Colour” screen. You can keep the rear light on simultaneously along with the front light or turn it off independently by sliding the tab located on the top right corner.

Selection of whites

• The “White” screen will allow you to control the basic CCT white light modes of the front light.
• From here you will be able to choose between warmer or cooler shades of white and adjust the brightness and temperature of the front light.
• Besides, you can activate or deactivate the front white light independently of the rear RGB colored light, simply by sliding the button located on the top right corner of the “White” screen.
  

Scene modes

• To select one of the scene modes, you will need to tap on the “Scene” tab at the bottom of the screen.
• From here, you can choose between the different static and dynamic scene modes provided by the App or create your own by tapping on the “Custom Scene” button in the upper left corner.

Planne

• You can create a lighting plans by clicking on the “Plan” tab at the bottom of the screen.
• From here you will be able to establish different plans for different times, establishing schedules, calendars and types of lighting.
  

Synchronization with music

• To get the lamp to follow the rhythm of the music in the room, you will need to tap on the menu icon at the bottom. Select the “Music” option from the drop-down menu.
• Accept all the accesses requested by the App so that the lights will follow the rhythm of the music by combining different lights, colors and effects.

Circadian Cycle

• Adjust the colour temperature of the lights naturally to keep your body in its natural rhythm.
• Light has a great effect on our circadian rhythm and our usual lighting interferes with the circadian rhythm causing health problems.
• Our smart ceiling lamp can be programmed to supply the right amount of light to the right colour temperature to work in harmony with our circadian rhythm and in our daily well-being.
  

Timer

• Tap “Timer” on the menu icon at the bottom. From here you will be able to choose the operation time range of the lamp from 0 to 23 hours and 59 minutes.
• If the smart ceiling lamp is on when the countdown starts, the smart ceiling lamp will turn off at the end time.
  

Voice Assistants

• To set up your voice assistants through the app, you will need to tap on the top right corner and then tap on the “Edit” icon.
• From here you can permit access to third parties to control the bulb, such as Alexa and Google Home.
• You can adjust the brightness, change the colour, or simply turn the light on and off withjust a few words.
  

Device settings

• The App also allows you to configure other features of the lamp such as its name.
• To manage these other features, you will need to access the upper right corner and tap on the “Edit” icon.
  

More about the App

You can adjust the different functions from the menu button at the top right corner of the App.

1. The device name can be changed as desired.
2. Device information.
3. Tap-to-Run and Automation allows you to check the Intelligent Automation to which your device is linked.
4. Supported third-party control provides information on how to connect your device with Amazon Alexa, Google Assistant.
5. Disconnection notice: allows you to alert yourself when your device is offline.
6. Create “Group” to control another smart device at the same time.
7. FAQ & Feedback allows users to report issues and obtain assistance.
8. Add to Home Screen allows you to add the smart device to your smartphone’s home screen.
9. Check the network of the device to check the status of the network connection.
10. Firmware information allows you to check the software or install updates on the device.
11. Restore factory settings: Allows you to reset the factory settings of the smart device.

Maintenance recommendations

• Regularly clean the product with a dry cloth.
• The product must be disconnected or switched off when cleaned.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product.
• Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water enters the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. That might damage it.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• Do not use the product if it is wet or damaged.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather).
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use it for a long period of time.
• Do not use the product if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not disassemble or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

Warranty: The 3-year warranty does not apply to products with consumable parts or parts subject to wear, except for defects in materials or manufacturing.

CE Declaration of Conformity

**** We hereby declare that the product (s) listed below satisfies the provision for
CE-marking according to the following European directive(s):
EN IEC 55015:2019+A11:2020 EN 61547: 2009
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A2:2021
Article: BXPLAFLED01
EAN: 8427542125909
Features: AC 220-240V, 50/60Hz, 24W
Manufacturer: ATLANTIS INTERNACIONAL, S.L.
Address: Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration: L’Hospitalet de Llobregat, October, 1st 2022
Nico Broder General Manager

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>