SMART WATCHES P45 Smart Watch User Manual
- June 9, 2024
- Smart Watches
Table of Contents
SMART WATCHES P45 Smart Watch User Manual
Welcome to use our high performance smart watch, which will bring you an intimate fitness experience.
Device maintenance
When maintenance for your watch, keep these tips in mind:
- Regularly clean the watchband, especially the inside of the watchband needs to be kept dry.
- Adjust the tightness of the watchband to ensure air circulation.
- Do not use excessive skincare products on the wrist wearing the watchband.
- Please stop wearing if skin irritation or discomfort.
Schematic Diagram of the Smart Watch Host
Frequently Asked Questions (FAQs)
Why does the Smart Watch automatically disconnect Bluetooth when the Android screen goes out?
- Lock background APP. When the Da Fit process is cleared, the Smart Watch will be disconnected from the mobile phone.
- Set APP self-startup
- Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.
Why cannot the Smart Watch receive message push?
- Please confirm that you have turned on the switch for message push at the mobile phone client.
- Please confirm that messages can be displayed normally in
Power-on
Long press the side button for 3 seconds or plug in the Magnetic charging
cable to charge and turn on.
Smart Watch APP Download and Binding
Download and install APP Scan the QR code with your mobile phone to download
the APP. Select App Store for IOS system, search and download the “Da Fit”
APP.
The Android system can choose the application market to download and install
the ” Da Fit ” APP,or scan the QR code to download. During the installation of
the APP, all pop-ups needto be allowed.
the mobile phone notification bar. The message push on the Smart Watch is completed by reading the message from the mobile phone notification bar. The Smart Watch will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client). 3 >Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Da Fit.
Why can’t take a hot bath with the Smart Watch?
Answer: the bath water has a relatively high temperature, and generates a lot
of vapor which isin the gas phase with small molecular radius and can easily
infiltrate into the Smart Watch from the shell gap. When the temperature drops
down, the vapor will condensate into liquid-phase droplets which will easily
cause the short circuit inside the Smart Watch and damage the circuit board
and then damage the Smart Watch.
Warning:
Please consult your doctor before you take a new sport. The Smart Watch should
not be used for any medical purpose though it may dynamically monitor the
heart rate at real time.
Note: The mobile phone must support Android 5.1 or IOS 8.0 or above, Bluetooth version 4.0 and above.
APP Binding Smart Watch
- Click on “Add Device” to bind the Smart Watch.
- Click your device in the scanned device list.
- The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to Android system.
- Successfully bound.
Bluetooth Call Connect
Android: After the APP successfully connects to the watch’s Bluetooth.
- The phone will automatically pop up a “pairing” request, click “Allow”.
- For some brands of mobile phone models, there is no need to pop up the pairing confirmation permission. After connecting to Bluetooth, the call function is also directly connected. After the binding is successful, you can answer and make calls on the watch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>