CONRAD SANSA 400 A Rechargeable LED Hand Lamp Instruction Manual
- June 9, 2024
- CONRAD
Table of Contents
CONRAD SANSA 400 A Rechargeable LED Hand Lamp
Operating Instruction
Rechargeable LED HAND Lamp SANSA 400 A
SAFETY INFORMATION
- Carefully read these operating instructions before using the device.
- Do not use the light if it is damaged – danger of death.
- In this case, contact an electrician or refer to the specified service address
- Do not look directly into the light.
- Never open the device.
- Do not use the working light in potentially explosive atmospheres – risk of death!
- To charge the batteries, only use a certified USB power supply unit.
COMMISSIONING
-
Before using the device for the first time, completely discharge and recharge the rechargeable battery once.
-
Unfold the lamp.
-
The lamp head can also be rotated clockwise by 180°.
-
Switch at top 1 : LED spot on – off.
-
Switch rotary wheel at side 2 :
LED front on – dimming – off. -
Lamp can be used during charging.
-
Charging indicator 4 : red during charging, green when accumulator is charged.
-
In cases of extended non-use, charge the rechargeable every 3 months.
CONTROL ELEMENTS
- On/off switch spot
- On/off switch/dimmer front
- LEDs front
- LED lamp head
- Charging socket
- Charging indicator (red/green)
- Rotatable hook
- Magnets
- USB charging cable
CHARGING
Charge your battery using the supplied USB cable only. Exclusively use a certified USB power source (e.g. charging device, computer) with a maximum of 5 V output voltage: Connection: USB source – USB charging cable 9 – charging socket 5.
TECHNICAL DATA
- LEDs: Front 12x SMD, spot 1x SMD
- Luminous flux: Front 400 lm, spot 70 lm
- Rechargeable battery: integrated, lithium-ion 3.7 V/2.0 Ah
- Charging input: Micro USB 5 V DC, internally limited to 1 A
- Operating time min./max.: Front 3.5 h (100%) to 80 h (10%), head 8 h
- Charging duration: < 3.5 h
- Temperature range: -10 °C – +40 °C
Electronic appliances, batteries and rechargeable batteries must not be
disposed of in household waste!
Old electronic and electric devices, as well as batteries and rechargeable
batteries are special waste and need to be gathered separately and be sent for
recycling in an environmentally friendly manner.
CONFORMITY DECLARATION
The Declaration of Conformity is filed with the manufacturer. For further
information, please refer to the Service/FAQ section on our homepage
www.brennenstuhl.com.
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
www.brennenstuhl.com