MEAN WELL HLG-150H 150W Constant Voltage + Constant Current LED Driver Owner’s Manual

June 9, 2024
MEAN WELL

MEAN WELL HLG-150H 150W Constant Voltage + Constant Current LED Driver

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
PRODUCT

FEATURES

  • Constant Voltage + Constant Current mode output
  • Metal housing with class I design
  • IP67/IP65 rating for indoor or outdoor installations
  • Function options: output adjustable via potentiometer; 3 in 1 dimming
  • Typical lifetime> 62000 hours
  • 7 years warranty

ASSEMBLY

  • LED street lighting
  • LED high-bay lighting
  • Parking space lighting
  • LED fishing lamp
  • LED greenhouse lighting
  • Type “HL” for use in Class I , Division 2 hazardous (Classified) location.

**GTIN CODE

**

MW Search : https://www.meanwel.com/serviceGTIN.aspx

DESCRIPTION

HLG-150H series is a 150W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-150H operates from 90-305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40C ~ +90C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-150H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-2

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-23

SPECIFICATION

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-24

BLOCK DIAGRAM

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-3

DRIVING METHODS OF LED MODULE

This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Typical output current normalized by rated current (%)

DIMMING OPERATION

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-5

3 in 1 dimming function (for B/AB-Type)

  • Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
  • Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
  • Dimming source current from power supply: 100μA (typ.)

Applying additive 1 ~ 10VDC

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-6 Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-7

Applying additive resistance

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-8

Note : In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-9

Using a switch and relay can turn ON/OFF the lighting fixture.

OUTPUT LOAD vs TEMPERATURE

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-10

STATIC CHARACTERISTICS

POWER FACTOR(PF) CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)

EFFICIENCY vs LOAD
HLG-150H series possess superior working efficiency that up to 94% can be reached in field applications 48V Model, Tcase at 80℃

LIFE TIME

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-15

MECHANICAL SPECIFICATION

Blank/D-Type

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-16

A-Type

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-17

B-Type

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-18

AB-Type

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-19

WATERPROOF CONNECTION

Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-150H to operate in dry/wet/damp or outdoor environment

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-20

Cable Joiner

MEAN-WELL-HLG-150H-150W-Constant-Voltage-Constant-Current-LED-Driver-
FIG-21

CJ04 cable joiner can be purchased independently for user’s own assembly. MEAN WELL order No. : CJ04-1, CJ04-2.

Junction Box Option

V

Junction box option is available for A / Blank – Type. Please contact MEAW WELL for details.

INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MEAN WELL User Manuals

Related Manuals