SEGWAY F65U ninebot KickScooter User Manual

June 9, 2024
Segway

SEGWAY Logo 1 Ninebot KickScooter
Product Manual

F65U ninebot KickScooter

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app, activate your Kick Scooter, and obtain the latest updates and safety instructions.

Diagram

SEGWAY F65U ninebot KickScooter

Dashboard & Power Button

SEGWAY F65U ninebot KickScooter - Fig

Power Button: Press the button to power on; press and hold the button for 3 seconds to power off. When the KickScooter is on, press the button to turn on/off the headlight and the tail light; and press twice to switch between the speed modes.
Speedometer: It displays the current speed of the scooter, as well as error codes.
Left Direction Indicator Icon : When this icon blinks, it indicates that the direction indicators on the left side are turned on.
Right Direction Indicator Icon: When this icon blinks, it indicates that the direction indicators on the right side are turned on.
Walk Mode: Max. speed is 5 km/h (3.1 mph).
F65U: The headlight and tail light keep flashing and can’t be turned off.

  • How to enable in the Segway-Ninebot app: Settings > Walk Mode.
    Speed Mode: There are three modes available. The top speed is as follows:
Model Mode F65U
ECO (Energy-saving mode) 15 km/h (9.3 mph)
D (Standard mode) 30 km/h (18.6 mph)
S (Sport mode) 30 km/h (18.6 mph)

Error Notification: It indicates that the scooter has detected an error.
Temperature Warning: It indicates that the battery temperature has reached 55°C (131°F) or is below 0°C (32°F).

  • At this point, the Kick Scooter cannot accelerate normally and may not be charged. DO NOT use until the temperature has reverted to the normal range.
    Bluetooth: It indicates that the scooter has been successfully connected to the mobile device.
    Battery Level: The total battery level equals 5 bars.
  • The battery power is very low when the first battery bar is red. Please charge your Kick Scooter immediately.

Specifications

| Item| Parameter
---|---|---
Product| Name| Ninebot Kick Scooter
Model| F65U
Length x Width x Height| Approx. 1196 x 569 x 1237 mm (47 x 22.4 x 48.7 in)
Folded: Length x Width x Height| Approx. 1196 x 569 x 540 mm (47 x 22.4 x 21.3 in)
Net Weight| Approx. 21.8 kg (48 lbs)
Rider| Payload| 30-120 kg (66-265 lbs)
Recommended Age| 14-60 years
Required Height| 130-200 cm (4’3–6’6″)
Machine| Max. Speed| Approx. 30 km/h (18.6 mph)
Typical Range| Approx. 65 km (40.4 miles)
Max. Slope| Approx. 20%
Traversable Terrain| Bicycle lanes. parks. campuses and most of the flat road conditions and typical Belgian roads
Operating Temperature| -10-40°C (14-104°F)
Storage Temperature| -10-50°C (14-122°F)
Charging Temperature| 0-40°C (32-104°F)
IP Rating| IPXS
Duration of Charging| Approx. 5 h
Battery| Nominal Voltage| 46.8 V=
Max. Charging Voltage| 54.6 V
Nominal Capacity| 12 Ah
Nominal EnergY| 561 Wh
Battery Management System| Over-heating. short circuit. over-current. over- discharge and over-charge protection
Motor| Nominal Power| 0.4 kW. 400 W
Max. Power| 0.7 kW. 700 W
Charger| Model| NBW 54 D603 DOD
Type| Built-in
Output Power| 0.16 kW. 160 W
Input Voltage| 100-240 V – 50-60 Hz. 2.0 A MAX.
Max. Output Voltage| 54.6 V=
Rated Output| 53.5 V=. 3 A
Features| Brake Light| Brighter when braking
Speed Modes| Energy-saving mode. Standard mode and Sport mode
Tire| Tire Pressure| 40-45 psi
Tires| 10-inch Pneumatic tire
[1] Typical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 18 km/h (11.2 mph) on average on pavement.

  • Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.

Certifications

This product is certified to ANSI/CAN/UL-2272 by SGS.
The battery complies with UN 38.3.
The battery complies with ANSI/CAN/UL-2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.
    CAN ICES-3 (B)/NMB-3(B)

FCC ID: 2ALS8-KS0012
IC ID: 22636-KS0012 XX CE.-Awww.segway.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals