MOEN 5622BL Kitchen Sink Faucets Single Lever Pull Out Spout Hot and Cold Water Mixers User Manual
- June 9, 2024
- Moen
Table of Contents
5622BL Kitchen Sink Faucets Single
Lever Pull Out Spout Hot and Cold Water Mixers
User Manual
5622BL Kitchen Sink Faucets Single Lever Pull Out Spout Hot and Cold
Water Mixers
Image is for reference only (Style varies by model)
Record Purchased Model Number: (Save instruction sheet for future
reference)
Register Online:www.moen.com/product-registration
PLEASE CONTACT MOEN FIRST
For Installation Help, Missing or Replacement Parts
(USA) 1-800-BUY-MOEN (1-800-289-6636)
www.moen.com
(Canada) 1-800-465-6130
www.moen.ca
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these
helpful tools.
| | |
---|---|---|---
Adjustable Pliers| Adjustable Wrench| Flathead Screwdriver|
Phillips Screwdriver
| | |
Safety Glasses| Sealant| Tape Measure| Thread Seal Tape
Parts List
A. Faucet Body
B. Escutcheon
C. Deck Gasket
D. Installation Tool
E. Support Bracket
F. Mounting Bracket Nut
G. Spray Wand
H. Hose Weight| I. Hose ProtectorJ. Pulldown Hose
J. Pulldown Hose
J1. Pulldown Hose Weight Indicator Mark
K. Outlet Hose
L. Supply Hose Hot
M. Supply Hose Cold
N. Deck Plate
O. Deck Plate Gasket
---|---
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET:
Always turn water supply OFF before removing existing faucet or disassembling
the valve. Open faucet handle to relieve water pressure and ensure that
complete water shut- off has been accomplished.
Icon Legend
For Single Hole Applications:
1. Place Escutcheon (B) and Deck Gasket (C) onto base of Faucet Body(A)
and place into sink hole.
NOTE: Install with handle on right side only
- Place Deck Plate Gasket (O) onto Deck Plate (N).
- Firmly snap Deck Plate Gasket (O) onto Deck Plate (N).
- Flip Deck Plate (N) over and place onto Mounting surface and install Faucet Body (A) in hole on sink.
- Slide Mounting Washer (E) up onto Faucet Body (A) under sink.
- Install Mounting Nut (F).
- Hand tighten Mounting Nut (F) with Installation Tool (D).
- Use screwdriver though hole in Installation Tool (D) to tighten firmly.
1. Install Hose Protector (I) finger tight.
- Attach Flexible lines (L and M) to shutoff valves.
- Tighten with wrench until secure.
1. Insert small end of Pulldown Hose (H) into spout
and feed through Faucet Body (A).
- Remove and discard plastic cap from end of Pullout Hose (H).
- Insert hose into Quick Connect Adapter (L).
- Push until a “click” is heard. Tug Downward to test engagement.
IMPORTANT – Locate Hose Weight Locator Mark (J1) on
Pulldown Hose (J). Install Hose Weight (F) just above of loop curvature in
hose on same side of hose as locator mark. Adjustable pliers may be useful to
securely clamp Hose Weight (H).
1. Turn on Hot (L) and
Cold (M) water supply.
- Hold Pulldown Hose (J) and turn on Faucet (A), allow water to run for 15 seconds.
- Turn off faucet (A).
ATTENTION
For the best performance of your new pulldown
faucet, Moen recommends the following:
- Maintain 8″x8″ clear area for the hose and weight to travel, free of any moveable items including (bottles, cleaning supplies, etc.). See Illustration.
- If non-moveable pipes or other fixtures are interfering, consider repositioning the weight higher on the hose.
- Periodically check to be sure no obstructions have entered this clear zone.
To enhance the performance of your pulldown or
pullout wand, Moen offers the 159060 Hose Guide to isolate the hose from
plumbing lines and other items under the kitchen sink. Call our Product
Consultants at 800-289-6636 or visit
www.moen.com to order part #159060.
- Remove protective cap from Spray Wand (G).
- Attach Spray Wand (G) to Pulldown Hose (J).
- Finger tighten.
1. Tighten Pulldown Hose (J), flush with Spray
Wand (G). Do not overtighten.
13. Spray Wand with Power boost™
1. Unscrew Pulldown
Hose (J) from Spray Wand (G) and remove screen and o-ring. 
1. Rinse debris from screen.
1. Renistall screen and o-ring as shown. Thread Pulldown Hose (J) onto
Spray Wand (G) and tighten.
1. Re-check water flow.
Moen Limited Lifetime Warranty
Moen products have been manufactured under the highest standards of quality
and workmanship. Moen warrants to the original consumer purchaser for as long
as the original consumer purchaser owns their home (the “Warranty Period” for
homeowners), that this product will be leak- and drip-free during normal use
and all parts and finishes of this product will be free from defects in
material and manufacturing workmanship. All other purchasers (including
purchasers for industrial, commercial and business use) are warranted for a
period of 5 years from the original date of purchase (the “Warranty Period”
for non-homeowners).
If this product should ever develop a leak or drip during the Warranty Period,
Moen will FREE OF CHARGE provide the parts necessary to put the product back
in good working condition and will replace FREE OF CHARGE any part or finish
that proves defective in material and manufacturing workmanship, under normal
installation, use and service. Replacement parts may be obtained by calling
1-800-2896636 (Canada 1-800-465-6130),
or by writing to the address shown. Proof of purchase (original sales receipt)
from the original consumer purchaser must accompany all warranty claims.
Defects or damage caused by the use of other than genuine Moen parts is not
covered by this warranty. This warranty is applicable only to products
purchased after December, 1995 and shall be effective from the date of
purchase as shown on purchaser’s receipt.
This warranty is extensive in that it covers replacement of all defective
parts and finishes. However, damage due to installation error, product abuse,
product misuse, or use of cleaners containing abrasives, alcohol or other
organic solvents, whether performed by a contractor, service company, or
yourself, are excluded from this warranty. Moen will not be responsible for
labor charges and/or damage incurred in installation, repair or replacement,
nor for any indirect, incidental or consequential damages, losses, injury or
costs of any nature relating to this product. Except as provided by law, this
warranty is in lieu of and excludes all other warranties, conditions and
guarantees, whether expressed or implied, statutory or otherwise, including
without restriction those of merchantability or of fitness for use.
Some states, provinces and nations do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state, province to
province, nation to nation. Moen will advise you of the procedure to follow in
making warranty claims. Simply write to Moen Incorporated using the address
below. Explain the defect and include proof of purchase and your name,
address, area code and telephone number.
Moen Incorporated
25300 Al Moen Drive
North Olmsted, Ohio 44070-8022
U.S.A.
INS11736 – 8/21
©2021 Moen Incorporated
Moen Inc.
2816 Bristol Circle
Oakville, Ontario L6H 5S7
Canada
References
- MOEN | Bathroom & Kitchen Faucets
- Moen|Llaves para baño y cocina, cabezales, accesorios y más
- Register Your Product | Moen
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>