VALBERG 972929 Steamer Instruction Manual

: June 9, 2024
: VALBERG

Table of Contents

INTRODUCTION
A Product overview
Technical specifications
B Product usage
- Before first use
- Use
C Cleaning and maintenance
WARRANTY CONDITIONS
Documents / Resources

VALBERG 972929 Steamer

972929 Steamer

INTRODUCTION

Thank you!

Thank you for choosing this VALBERG product.
VALBERG products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day !

Welcome to ELECTRO DEPOT.

A Product overview

Before using the unit, carefully read both the Manual and Regulatory Warnings booklet.
Keep these instructions for future reference and pass them onto any new owners of the unit

List of parts

Product overview

**A** Water tank
**B** Water tank lid
**C** Steam button with Lock switch
**D** Soleplate
**E** Indicator light (Blue ON/Red ready)
**F** Handle
**G**Cable protector
**H** Measuring cup
**I** Fabric brush attachment
**J** Delicate fabrics attachment

Product overview

Unpack and remove all labels from the unit. Please check that all of the unit’s parts are included and intact. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

This unit is intended for household use only. It is not designed for industrial, commercial or outdoor use. This unit is designed exclusively for vertical garment steaming.
Use the unit indoors, in a dry and well-ventilated place.
Any other use may damage the unit or result in fire, electric shock or injury

Technical specifications

Model:	972929 – EXPRESS V2
Operating voltage:	220-240 V ~, 50-60Hz
Rated power:	1400W
Continuous steam:	20g +/-5 g
Water tank capacity:	320 ml
Protection class:	Class I

B Product usage

Before first use

Remove any label or protective cover from the steamer head, and fully extend the power cable before use.
Steam on an old garment for about 10 minutes to clear any factory residue from the water tank. Observe the instructions in the next sections

Use

Filling the water tank
The steamer is designed to be used with tap water. However, if you live in an area with very hard water, limescale can quickly build up inside the unit. In that case, we recommend using a mixture of 50% tap water and 50% distilled water, to prolong the lifespan of your steamer.

Before filling the water tank, unplug the steamer from the mains socket.
Lift the bottom of the water tank lid to open it and fill the tank with a measuring cup.
The water tank can be detached to fill under the tap. To detach the water tank, hold the water tank with one hand and turn the steamer handle anti clockwise with the other hand.
Remove the water tank and open the lid to fill.
Fill the water tank with tap water up to the “MAX” level mark (320 ml). Make sure the water tank is at least one third full and does not exceed the “MAX” level mark.
Close the lid and dry off any moisture.
To reattach the water tank, align the steamer handle on the water tank and turn the handle clockwise

Important:

Do not add any substances into the water tank, such as starch, fabric softener,
chemical additives, scented oils, descaling agent, or vinegar.
Do not use the steamer when the water tank is empty to avoid damage to the unit.

Using the steamer
The steamer is designed to be used vertically on hanging garments.

WARNING – Risk of burns:

The soleplate and surfaces of the steamer marked with this sign become hot during use and can remain hot for some time after use. Do not touch hot surfaces. Always use the handle.
**** The steamer generates high temperatures of steam. Never direct the steam or soleplate towards people or pets.
Never steam while wearing the garment.
Never use the steamer in a horizontal position or tilted backwards, as it can cause a discharge of hot water.

Hang the garment on a clothes hanger, away from walls, furniture and any item to avoid damage by steam.
Place the steamer upright on a flat, level and stable surface.
Make sure the water tank is filled.
Attach a brush attachment if needed (→Using a brush attachment).
Plug the steamer into a suitable mains socket. The indicator light will light up blue,
indicating that the steamer is on and heating up to the set temperature.
When the indicator light turns red, the steamer is ready to use. Always wait until the
indicator light turns red before steaming.
Hold the steamer upright and press the Steam button to produce steam. Release the button to stop.
Move the steamer up and down over the garment to steam out wrinkles. If the fabric is delicate and the steamer is used without the Delicate fabrics attachment, keep a distance of at least 5 cm between the soleplate and the fabric.
Pull the sides of the garment with one hand to stretch it slightly. Use a heat protective glove to protect your hand from steam if required.
To have continuous steam, hold down the Steam button and slide the Lock switch down to lock the button. This allows you to steam garments without the need to hold down the Steam button.
To stop the continuous steam, slide the Lock switch up.
Unplug the unit and refill the water tank when the water level is below one-third of the tank (→ Filling the water tank). If the unit makes a loud humming sound and no steam is produced, this may indicate that the water tank is empty.
Once finished using the steamer, wait for 15 seconds until no steam is generated, and then unplug the steamer from the mains socket to turn it off.
Clean the unit (→ Cleaning and maintenance).

WARNING: Never leave the unit unattended while it is plugged into the mains socket. Unplug the unit immediately after each use.

Using a brush attachment

Before attaching or removing a brush attachment, unplug the steamer and allow it to cool down.
Align the desired brush attachment to the soleplate and carefully press on both sides of the attachment until it “clicks” into place. To remove the brush attachment, gently pull the side tabs of the attachment.
The Fabric brush attachment opens the weaves of heavy fabrics for better steam
penetration. Use this attachment to remove hair, dust and lint.
The Delicate fabrics attachment helps protect delicate fabrics from the direct heat of the iron. Use this attachment as an ironing cloth to protect fabrics from scorching or shine marks.

Low temperature protection
The steamer is designed with low temperature protection. When the temperature in the steamer is not high enough to generate steam, the pump will be deactivated until the indicator light turns red. This feature prevents hot splashes if the Steam button is pressed when the indicator light is blue.

Steaming tips

Before steaming a garment, always check the label to make sure that the fabric is suitable for steaming.
Always test on a small corner of the garment before steaming the whole garment.
Turn delicate fabrics inside out before steaming.
Check clothing pockets to make sure they are empty before steaming.
When pressing the Steam button, you will feel a slight vibration and hear a subtle buzzing sound. This is normal.
Do not steam metal accessories to avoid discoloration.

Anti-calc system
A special resin filter inside the water tank softens the water and prevents scale build up in the soleplate. The resin filter is permanent and does not need replacing.

Note:

Only use tap water in your steamer. Distilled or demineralized water makes the Anti-calk system ineffective by altering its physicochemical characteristics.
Do not use chemical additives, scented substances, decalcifies, or any other substance. Failure to follow the instruction will void the warranty.

C Cleaning and maintenance

Cleaning and maintenance

WARNING:

Before cleaning, always unplug the unit from the mains socket and allow it to cool down completely.
Never immerse the unit, power cable or plug in water or any liquid. Never rinse them under the tap. Keep all electrical parts dry.
Never use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects or scouring pads to clean the unit.
Empty the water tank after each use. Detach the water tank, open the lid and pour the water into a sink or bucket
Wipe the soleplate and exterior of the steamer with a soft cloth, moistened with water. Dry well after cleaning.
Remove any brush attachment from the soleplate. Clean the brush attachments with a soft damp cloth. Allow to air dry
Reattach the water tank after cleaning and store the steamer upright.

Troubleshooting

Follow this troubleshooting guide to solve common problems that you may encounter with the unit. If the problem persists, stop using the unit and contact an authorized Service Centre for examination or repair.

Problem	Possible Cause	Solution
The steamer does not heat up.

The plug is not inserted correctly.
No power supply

|

Ensure the plug is firmly inserted into the mains socket.
Check the power supply

The steamer is not producing steam.|

The water tank is empty. • The water tank is not properly attached.
The Steam button was pressed when the indicator light was blue.
The Steam button was not pressed long enough.

|

Unplug the steamer and fill the water tank.
Reattach the water tank.
Press the Steam button when the indicator light is red.
Press and hold the Steam button for a few seconds.

The water tank is leaking.|

The water tank is overfilled.
The water tank lid was not properly closed.
The steamer was used horizontally.

|

Ensure the water level does not exceed the “MAX” level mark.
Close the water tank lid correctly.
Always hold the steamer vertically. It is designed for vertical steaming only

The steamer makes a loud pumping sound.|

The water tank is empty.
The steamer was not used for a long time. There is air in the water pipe.

|

Check the water level in the water tank.
This is normal and should stop quickly with normal use.

Discoloration of metal accessories|

Steam was applied directly on the metal accessory

|

Do not steam directly on metal accessories. Steam the fabric around it.

Storage

Always unplug the unit before storing it. Wait for the iron to completely cool down before putting it away.
Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY CONDITIONS

This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase. This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
proof of purchase required.

ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL – FRANCE