cudy GS1010PE 10-Port Gigabit PoE Plus Switch User Manual

: June 9, 2024
: cudy

Table of Contents

cudy GS1010PE 10-Port Gigabit PoE Plus Switch
Hardware connection
Physical appearance
Specifications
LED and Interface Explanation
Warranty Conditions
EU Declaration of Conformity
WEEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cudy GS1010PE 10-Port Gigabit PoE Plus Switch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line. www.alza.co.uk/kontakt

Importer

+44 (0)203 514 4411 Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Hardware connection

cudy GS1010PE 10-Port Gigabit PoE Plus Switch 1

Physical appearance

Front board

cudy GS1010PE 10-Port Gigabit PoE Plus Switch 2 Back board

cudy GS1010PE 10-Port Gigabit PoE Plus Switch 3

Specifications

Network Protocol: IEEE802.3 / IEEE802.3u IEEE802.3x / IEEE802.3af/at
PoE Standard IEEE802.3at (30 W) and IEEE802.3af (15.4 W)
POE port output DC 48-55 V
Power Pin Power over spare pairs 1/2 (+), 3/6 (-)
AC Input VoltageAC100 ~ 240 V
Output 52 V ~ 2.3 A
Total Power 120 W
Dimension(L×W×H) 222 mm 163 mm 40 mm
Bandwidth 20 Gbps (non-blocking)
MAC Address 2K MAC address table
Packet Buffer Memory 2 M
Forwarding Mode Store – And – Forward
Working Temperature -20 ~ 50 ℃
Storage Temperature -40 ~ 80 ℃
Working humidity Max relative humidity 90 %, non-condensing
Storage humidity Max relative humidity 95 %, non-condensing
Working hight Max 10 000 feet（3 000 meters）
Storage hight Max 10 000 feet（3 000 meters)

LED and Interface Explanation

PWR Power LED
- On: Powered
- OFF: No power
Link ACT Link LED
- ON: Link connected
- OFF: Link disconnected
- Flashing: Link data transmitted

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:

Title: 10-Port Gigabit PoE + Switch
Model / Type: Cudy-GS1010PE

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/35/EU
Directive No. 2014/30/EU
Directive No. 2009/125/EC
Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.