cudy RE1200 AC1200 Dual Band Range Extender User Manual

June 9, 2024
cudy

cudy RE1200 AC1200 Dual Band Range Extender

cudy-RE1200-AC1200-Dual-Band-Range-Extender-PRODUCT

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
+44 (0)203 514 4411
ImporterAlza.cza.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Using WPS Button

  1. Plug the extender next to your router and wait until the LED turns solid on. cudy-RE1200-AC1200-Dual-Band-Range-Extender-FIG 2
  2. Press the WPS button on your router, and then press the WPS button on the extender withing 2 minutes.cudy-RE1200-AC1200-Dual-Band-Range-Extender-FIG 3
  3. Then the LED will start to flash, wait until the LED and LED turn solid on, which means the extender connects to your existing host WiFi network. cudy-RE1200-AC1200-Dual-Band-Range-Extender-FIG 6
  4. If the LED does not turn solid on after 2 minutes, try step 2 again. If still not work, try Method Two: Using Web Browser, or contact our [email protected].

Connect your device to the extenders WiFi network.

The extender’s new WiFi network name is based on your Host WiFi network name, with —EXT2G or —EXT5G at the end of the name.
For example:

  • Host Wi-Fi network name: YourNetWorkName
  • New extended Wi-Fi network name: YourNetworkName—EXT2G YourNetworkName—EXT5G

Use the same Wi-Fi password that you use for your Wi-Fi router.

Relocate the extender halfway between your router and the Wi-Fi dead zone, find a good place to plug it according to the LED.cudy-RE1200-AC1200-Dual-
Band-Range-Extender-FIG 7

Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong

Enjoy the internet!

Using Web browser

  1. Plug the extender next to your router and wait until the LED turns solid on. Connect your computer or smartphone to the extenders network Cudy-Extender

  2. Then below window will pop up, use admin for password to log in.
    Note: If the login window does not appear,Launch a web browser, and enter http://cudyre.net/ or http://192.168.10.254/ in the address bar. Use admin for password to log in. If still not work, please refer to FAQ > Q1.
    Select Wireless Extender, then click Next.

  3. Relocate the extender halfway between your router and the Wi-Fi dead zone, find a good place to plug it according to the LED.cudy-RE1200-AC1200-Dual-Band-Range-Extender-FIG 13.

Red Flash: Connecting / not connected to host Wi-Fi
Solid Red: Connected, signal is weak
Solid Purple: Connected, signal is fair
Solid Blue: Connected, signal is strong

LED and Button

LED Colour Status Indication
  / Off No host Wi-Fi configuration
Red Flash Connecting / not connected to host Wi-Fi
  On Connected to host Wi-Fi, signal is weak
Purple On Connected to host Wi-Fi, signal is fair
  Blue On Connected to host Wi-Fi, signal is good
**** / Off Not connected to host Wi-Fi
Blue Flash The system is booting or upgrading
    On System startup is complete
  / Off Not connected to host Wi-Fi
Blue Flash WPS in progress
  On Connected to host Wi-Fi
Reset Long press for 2 seconds Press and hold Reset button for 2

seconds until all the LED lights turn on and off.
WPS| Press to take

effect

| Press the WPS button until WPS LED start flashing.

FAQ

Q1: What can I do if the login window does not appear?

  • A1: If your computer is wirelessly connected, make sure that you have connected to the extenders SSID.
  • A2: If your computer is connected via an Ethernet cable, please make sure that the connection is stable.
  • A3: Make sure your computer is set to obtain an IP address and DNS server address automatically.
  • A4: Verify that http://cudyre.net ( or http://192.168.10.254/) is correctly entered in the web browser and press Enter
  • A5: Reset the device and try again

Q2: What should I my handy cannot find Wi-Fi signal?

  • A: Please make sure the device is connected, power on. If everything is normal but still no signal, please try to use computer to set, or restore the extender to factory settings. If after restoring factory settings but still no signal, you can restart the extender, if it still doesn’t work, maybe the device has fault.

Q3: How to Reset to default?

  • A: While the power is still on, keep pressing the Reset button for 2 seconds, and wait for 1-2 minutes for it to restart.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cza.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:
Title: Wi-Fi router
Model / Type: Cudy-RE1200
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2009/125/EC
Directive No. 2011/65/EU as amended 2015/863/EU
Prague

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

cudy User Manuals

Related Manuals