DETEX 03WM Electric Unlock Trim Instruction Manual
- June 4, 2024
- DETEX
Table of Contents
DETEX 03WM Electric Unlock Trim
TOOLS AND SUPPLIES
Safety Glasses
(Always put on safety glasses prior to beginning installation of unit)
Pencil
Center Punch
Hammer
Drill Motor
Drill Bits & Taps
Screw Driver (Phillips Drive)
Tape Measure
For WARRANTY information, scan code below
or go to
www.detex.com/warranty
For device installation videos,
scan code below
or **go towww.detex.com/videos**
OVERVIEW
| ITEM | PART NO. | QTY | DESCRIPTION |
|---|---|---|---|
| 1 | 103291-9 | 1 | TRIM PLATE, 03WM, BRUSHED STAINLESS STEEL FINISH (630) |
| 2 | 102281-X | 1 | CYLINDER, MORTISE, 5 PIN |
| 3 | 100752-X | 1 | CYLINDER COLLAR, TALL |
| 4 | 100464-9 | 4 | SEX NUT, 1/4-20 |
**STEP 1: PREP DOOR
**
MARK & DRILL HOLES – TRIM SIDE:
Use plastic template to mark TRIM holes (LHR shown)
NOTE: The height from the finished floor to the trim/device centerline that
Detex recommends is 40″.
If unsure of trim/device centerline location, use the method below and at
right to determine correct trim location.
STEP 2: INSTALL TRIM
STEP 3: INSTALL MORTISE LOCK STEP 2: INSTALL TRIM
Mortise lock and mounting hardware provided with exit device. Fasten loosely.
STEP 4: INSTALL MORTISE CYLINDER
STEP 5: SECURE CYLINDER
TRIM INSTALLATION COMPLETE
Continue installation using device instructions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>