DETEX 107123 10 Function Lever Trim Instruction Manual

DETEX 107123 10 Function Lever Trim Instruction Manual

www.detex.com
www.detex.com/warranty
www.detex.com/videos

Your particular part or configuration may not be shown:
Contact Detex technical support
at 800-729-3839 (option 2)

Your particular part or configuration may not be shown:
Contact Detex technical support at 800-729-3839 (option 2)

STEP 1: PREP TRIM

NOTE:

1. Mortise cylinder NOT supplied with trim, but can be ordered separately.
2. Trim handing is field reversible. Device cover is handed and must be ordered RHR or LHR (see step 4).
3. 6-pin cylinder installation shown.

STEP 2: PREP DOOR (Rim)
Mark and drill holes
(LHR installation shown, reverse all steps for RHR)

STEP 2: PREP DOOR (Mortise)
TRIM SIDE: Use plastic template to mark and drill TRIM holes
(LHR installation shown, reverse all steps for RHR)

NOTE:

1. For a retrofit application, remove mortise lock (if required) and device before installing new trim.

STEP 3: INSTALL TRIM
(RIM installation shown)

STEP 4: INSTALL DEVICE AND BRACKET ASSEMBLY
(RIM installation shown)

References

• detex.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>