DETEX 105151 Trim Lock Device Instruction Manual
- June 4, 2024
- DETEX
Table of Contents
INSTALLATION INSTRUCTIONS FOR ADVANTEX NARROW (01DN) TRIM OR WIDE (01D)
TRIM
Drawing # 105151 & 105150
PREPARING THE DOOR
- Mark and centerpunch the exit device mounting plate holes according to the exit device instructions.
- Drill pilot holes at centerpunched locations. CAUTION: Be sure to drill STRAIGHT through the door.
- For METAL doors: DEVICE SIDE: drill a 5/16″ hole
TRIM SIDE: drill 1/2″ hole
For WOOD doors: drill a 1/2″ hole through a door
ASSEMBLE THE OUTSIDE TRIM AND BACKPLATE AS SHOWN BELOW.
Resume the exit device instructions.
Should you have a Question/Problem with your Detex device please call Detex
Technical Support from the job site at
1-800-729-3839 and choose option 2 on
our menu. Please do not return the product to the distributor.
For WARRANTY information, scan code below or go to
www.detex.com/warranty
For device installation videos, scan code below or go to www.detex.com/videos
https://qrs.ly/roaw7bp
Detex Corporation,
302 Detex Drive,
New Braunfels,
Texas 78130-3045
830-629-2900 /
800-729-3839
Fax800-653-3839
Text photos only:830-481-6433
INTERNET:www.detex.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>