ZALMAN Z1 Iceberg Atx Mid Tower Computer Case User Manual

: June 9, 2024
: ZALMAN

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case

Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product.
Severe damage may occur when mounting the system, so do not apply excessive force.
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
Be careful not to block the ventilation hole of the product when using the system.
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
Store and use the product out of children’s reach.
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

Model	Z1 Iceberg	Z1 Iceberg White
Case Form Factor	Micro ATX Mid-Tower
Dimensions	409 x 221 x 426(H)mm
Weight	5kg
Case Materials	Plastic, Steel, Tempered Glass
Motherboard Support	mATX / Mini-ITX
Maximum VGA Length	330mm
Maximum CPU Cooler Height	160mm
Maximum PSU Length	210mm
PCI Expansion Slots	4
Drive Bays	2 x Combo (3.5″ or 2.5″, 1 x Toolless), 3 x SSD (2.5″)

Fan Support

Radiator Support

Reset button, Power button

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG3

Accessories component

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG4

I/O Ports

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG5

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
ⓐ| Power Button| ⓑ| Reset Button| ⓒ| HDD / Power LED| ⓓ| Microphone Jack
ⓔ| Headphone Jack| ⓕ| USB 2.0 Port| ⓖ| USB 3.0 Ports| |

Removing the side panels

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG6

Removing the front panel

Mounting the motherboard

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG8

Motherboard size

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG9

Mounting PCI-E(VGA) card

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG10

Mounting the 2.5″ SSD

Mounting the 3.5″ and 2.5″ SSD / HDD

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG13

Mounting the PSU

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG15

Mounting the radiator

Mounting the fans

ZALMAN Z1 Iceberg Atx Mid Tower Computer Case-FIG17

Fan(s) Included / Fan Specifications

I/O Connectors

Certification

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European Ountries with separate collection systems)
ROHS
This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS
(Restriction of Hazardous Substances) Directive.
www.zalman.com

Zalman Tech Co.,Ltd.