Connects2 CTMULTILEAD.5 Universal Patch Lead Installation Guide
- June 4, 2024
- Connects2
Table of Contents
Connects2 CTMULTILEAD.5 Universal Patch Lead
FEATURES
- Can be paired with any Connects2 aftermarket harness when upgrading the aftermarket stereo
- Accepts signals from multiple brands of stereo
- Quick & simple installation
DISCLAIMER
The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the vehicle by the manufacturer or damages that may occur through the installation .
CTMULTILEAD.5 – INSTALLATION MANUAL
Examples of lead configurations:
ALPINE
Cut connection between J2, then use the Jack connection for the new stereo.
KENWOOD
Cut connections between J1 and J2, then use the wired connections for the new
stereo.
ZENEC
Cut the connection between J1, J2 and J3. Solder together the wires from Pin
10 (J2) and Pin 12 (J1). Then use the wired connections for the new
stereo.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>