SOMOGYI HG PR 20 Electronics Coffee Maker Instruction Manual

: June 4, 2024
: SOMOGYI

Table of Contents

Structure
IMPORTANT SAFETY INSTRUCTIONS
PUTTING INTO USE
CLEANING, MAINTENANCE
Descaling
TROUBLESHOOTING
DISPOSAL
FEATURES
BEFORE MAKING COFFEE
MAKING ESPRESSO OR DOUBLE ESPRESSO COFFEE
FROTHING MILK, MAKING CAPPUCCINO
STANDBY MODE
TECHNICALSPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SOMOGYI HG PR 20 Electronics Coffee Maker Instruction Manual

Structure

Figure 1
Structure

water tank cover
water tank
steam valve
unit casing
milk frothing nozzle
base
on/off switch
cup warmer
espresso touch button
double espresso touch button
steam heat-up touch button
holder
float
removable grille
drip tray
measuring spoon and compactor
1-dose filter for espresso
2-dose filter for double espresso
filter holder
outlets

IMPORTANT SAFETY INSTRUCTIONS

READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!

WARNINGS

Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in Hungarian language.
This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the safe use of the appliance and understand the hazards involved. Children may not play with the appliance.
Children aged over 8 years may perform the cleaning or user maintenance of the appliance under supervision.
Keep children aged less than 8 years away from the appliance and its mains cord.
Make sure that the appliance was not damaged during shipping.
The appliance may be used in households or similar places, e.g.: staff kitchenette in shops, offices and other workplaces, hotel or motel rooms and other accommodations, guest houses providing accommodation with breakfast.
Use the appliance only for making coffee and frothing milk.
Use it only under dry, frost free, indoor conditions.
The appliance must be placed on a solid, horizontal surface.
Observe the positioning clearances shown on Figure 2. Observe the requirements effective in the country of use.
Do not operate the appliance with a program switch, timer, separate remote control systems etc. which may switch on the appliance automatically.
You can touch the plastic switch, cover and handles, but not the hot metal surfaces.
Use only with parts supplied with the appliance. The use of similar parts from other manufacturers may cause injuries.
Before switching on, always make sure that the water tank cover is firmly attached.
ATTENTION! Steam may cause burns. Do not remove the filter until there is overpressure in the coffee maker.
Before filling the water tank, switch off the appliance. Use only cold drinking water to fill the tank up to the MAX mark (1.4 litres).
Do not relocate the appliance if there is water in the water tank or with the glass pot in place.
Do not place the appliance on or near an electric or gas oven or other heat sources.
Operate the appliance under constant supervision at all times.
Do not operate the appliance near children without supervision.
If you notice any irregularities (such as unusual noise from the appliance or burning smell), switch off and unplug the appliance immediately.
Protect from dust, moisture, sunlight and direct heat.
Only connect to earthed wall socket with 230V~ / 50Hz rated supply voltage.
Do not use an extension cord or splitter to connect the appliance to the mains.
Caution! Prevent water from splashing on the mains socket.
Never touch the appliance or the power cord with wet hands.
To avoid the risk of electric shock, never immerse the appliance, or the mains cord or plug in water.
Keep the appliance in a place, where the power supply plug can be easily reached and unplugged.
The power must not come into contact with hot surfaces.
Run the power cord so that it cannot be accidentally disconnected and does hang down from the table edge.
Before relocating or cleaning the appliance, disconnect it by unplugging the mains plug, and then let it cool down.
The heating elements / heated surfaces of the appliance will remain warm for a while after switching off.
If you are not going to use the appliance for an extended period, turn it off and unplug the power cord. Store in a dry, cool, frost-free place.
The product is designed for household, not for industrial use.

Warning icon Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.

PUTTING INTO USE

Before installation, carefully remove packaging, and make sure not to damage the unit or the power cord. If you find any damage, the unit must not be operated!
The appliance is exclusively for use in a dry, indoor environment.
Place the unit on its base on a hard, flat surface.
When using the appliance, always ensure the minimum positioning clearances shown in Figure 2 around the product.
Wash the filters (17, 18), the filter holder (19) and the water tank (2) thoroughly with running hot water and using dishwasher detergent, and then rinse them with clean water.
When the washed parts are dry, assemble the appliance. Do not put coffee in the filter.
Insert the single dose filter into the filter holder, then snap the filter holder into place with the handle looking to the left toward the open padlock. Turn it to the right until it stops at the closed padlock mark, so that the handle looks forward. The edge of the filter holder should be clean to closely align with the seal on the appliance.
Fill the water tank (2) with cold tap water to reach between the MIN mark and MAX mark.
Put the water tank cover (1) back in its place.
Plug the unit into a standard grounded wall socket.
Switch on the appliance by pressing the on/off button (7).
The 3 icons on the appliance display will start to flash and the coffee machine will heat up to make coffee.
After about 1 minute, the 3 icons will illuminate continuously indicating the end of the heat-up cycle.
Place a cup under the outlets.
Touch the espresso button (9).
After the water has finished dripping, remove the filter holder, rinse the filter with cold water and repeat the process with the double dose filter.
To put the milk frother into use, touch the steam heat-up button. The icon will keep flashing until the appliance completes heat-up for the steaming, then it will illuminate continuously, when the correct temperature is reached.
Immerse the frothing nozzle in half a glass of water and turn the steam control (3) leftward to steaming position. Steaming will start and become continuous.
Close the steam control, and the steaming pictogram will light up.
If you tap on the steaming pictogram now, the two icons on the left (espresso / double espresso) will start flashing quickly, indicating that the appliance is too hot to make coffee.
When the appliance cools down, the icons will illuminate continuously again.
You can speed up cooling by opening the steam control; this will allow the hot water to escape via the frothing nozzle.
Now the device is ready for use.

CLEANING, MAINTENANCE

You can clean the inside of the nozzle immediately after frothing by allowing the steam to flow into half a glass of water.
Before any further cleaning, turn off the appliance and disconnect it from the power supply by pulling out the plug.
Allow the appliance to cool down (min. 20 minutes). Remove the coffee grounds after every use.
Wash the filter, the filter holder, the water tank, the removable milk frothing nozzle, the drip tray and the grille by hand.
Do not put the filter holder back in place until you are about to make coffee. This prevents the seal from being worn unnecessarily.
Carefully clean the frothing nozzle and tube, the tube may still be hot.
Clean the outside of the appliance with a slightly damp cloth. Do not use aggressive cleaning agents! Do not let water leak inside the appliance or spill on electrical components.
Do not immerse the appliance in water.

Descaling

We recommend removing any deposited scale once a month in case of hard water and every 2 months in case of medium hard or soft water.

When the appliance has cooled down, fill the water tank with a 1:1 mixture of water and 10% vinegar to the Max mark (1.4 litres).
Snap the filter holder on the machine without any filter.
Place a cup under the outlets (20).
Tap the espresso button, then wait until the program stops. Repeat this 3 times.
Immerse the frothing nozzle in half a glass of water.
Touch the steam heat-up button (11). Do not wait until the heat-up completes, but immediately open the steam valve for approx. 1 minute. Then close it and let the appliance stand for 15 minutes. Repeat this 3 times.
Tap the double espresso button (10), then wait until the program stops. Repeat this until the water tank runs out. Repeat steps 4 to 7 with clean water until you no longer smell vinegar.
Follow the steps described under PUTTING INTO USE, and then you can start using the coffee maker again.

TROUBLESHOOTING

Error observed	Possible resolution of the error
The appliance does not brew coffee.	Check the power supply and the power

switch.
Fill the water tank with water.
Use less or coarser ground coffee.
No steam is produced.| Fill the water tank with water.
Clean the frothing nozzle.
The coffee leaks over of the edge of the filter holder.| Use coarser ground coffee.
Water appears around the appliance.| Empty the drip tray.
The milk does not foam.| Wait for the appliance to heat up for steaming.
Use cold skimmed, up to 1.5% fat milk. The glass should be of room temperature.
All three touch buttons flash quickly| Heat sensor fault – contact a specialist service
None of the touch buttons illuminate when the appliance is switched on| Thermal fuse fault – contact a specialist service
The middle touch button pulsates| This indicates standby mode, not a fault. Touch the button.

DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health.
Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

FEATURES

1 or 2 cups of espresso
20 bar pressure
touch control
stainless steel filters, 2 sizes
cup warmer
milk frothing function for cappuccino
1.4 litre removable water tank
removable drip tray
removable frother
easy to clean
non-slip legs

BEFORE MAKING COFFEE

You can choose pre-ground or fresh ground coffee for your coffee. Pre-ground coffee retains its aroma for 7 to 8 days when stored in an airtight container in a cool, dark place. Do not refrigerate or freeze it. If stored in the same way, coffee beans retain their aroma for up to 4 weeks. If made from beans ground fresh right before use, your coffee will be richer in taste and better.
The grain size of ground coffee is ideal if it resembles salt. Coarser ground coffee let the hot water flow through too easily, and your coffee will be thin.
If the coffee is ground fine like flour, it will produce very strong coffee, but it may clog the coffee maker.

MAKING ESPRESSO OR DOUBLE ESPRESSO COFFEE

Switch on the appliance by pressing the on/off button (7).
The 3 icons on the appliance display will start to flash and the coffee machine will heat up to make coffee.
After about 1 minute, the 3 icons will illuminate continuously indicating the end of the heat-up cycle.
Place the single dose filter in the filter holder, fill it with ground coffee and properly compact it.
Snap the filter holder into place with the handle looking to the left toward the open padlock. Turn it to the right until it stops at the closed padlock mark, so that the handle looks forward. The edge of the filter holder should be clean to closely align with the seal on the appliance.
Place a cup under the outlets.
Touch the espresso button (9).
The machine brews the coffee and stops at the end of the process.
To make a double espresso, use the double dose filter with more ground coffee, and press the double espresso button (10) to brew it.

FROTHING MILK, MAKING CAPPUCCINO

Cappuccino consists of 1/3 part espresso coffee, 1/3 part steamed milk and 1/3 part milk foam. Making milk foam requires practice, so don’t get desperate if you don’t succeed at first. For best results, we recommend you to froth the milk in a separate glass and pour it over the coffee afterwards.
Use skimmed, up to 1.5% fat milk for frothing. Note that the milk should be cold and the glass of room temperature.

The first step is to make espresso or double espresso coffee.
When the coffee is ready, touch the steam heat-up button. The icon will keep flashing until the appliance completes heat-up for the steaming, then it will illuminate continuously, when the correct temperature is reached.
Immerse the frothing nozzle in half a glass of water and turn the steam control (3) leftward to steaming position. Steaming will start and become continuous.
Fill a metal or porcelain mug with half-cold milk.
Immerse the milk frothing nozzle just below the surface of the milk and start steaming.
Make circles with the mug for about 30 seconds keeping the nozzle below the surface of the milk all the time.
When the volume of the milk has doubled, immerse the nozzle deeper into the milk to heat it up.
Shut off the steam using the control. You can now take away the milk from the nozzle.
You are now ready to put together your cappuccino. Pour coffee up to 1/3 of a cup, then add the same amount of steamed milk. Finally, put milk foam on top with a spoon.
If you tap on the steaming pictogram now, the two icons on the left (espresso / double espresso) will start flashing quickly, indicating that the appliance is too hot to make coffee. When the appliance cools down, the icons will illuminate continuously again. You can speed up cooling by opening the steam control; this will allow the hot water to escape via the frothing nozzle.

STANDBY MODE

If the machine is not used for more than 30 minutes, it will switch to standby mode, as indicated by the pulsating illumination of the middle double espresso button. Touch the key to enter active mode.

TECHNICALSPECIFICATION

power supply: 220-240V~ / 50/60 Hz
power: 1350 W
Contact protection rating: class I
dimensions: 153 x 320 x 328mm
water tank capacity: 1.4 litres

Producer:
SOMOGYI ELEKTRONIC® • H – 9027 • Győr, Gesztenyefa út 3. • www.somogyi.hu
Distribútor: SOMOGYI ELEKTRONIC SLOVENSKO s. r. o.
Ul. gen. Klapku 77, 945 01 Komárno, SK • Tel.: +421/0/35 7902400 • www.somogyi.sk
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 • www.somogyi.ro
Uvoznik za SRB: ELEMENTA d.o.o.
Jovana Mikića 56, 24000 Subotica, Srbija • Tel:+381(0)24 686 270 • www.elementa.rs
Zemlja uvoza: Mađarska • Zemlja porekla: Kina • Proizvođač: Somogyi Elektronic Kft.
Uvoznik za HR: ZED d.o.o.
Industrijska c. 5, 10360 Sesvete, Hrvatska • Tel: +385 1 2006 148 • www.zed.hr
Uvoznik za BiH: DIGITALIS d.o.o.
M.Spahe 2A/30, 72290 Novi Travnik, BiH • Tel: +387 61 095 095 • www.digitalis.ba
Proizvođač: Somogyi Elektronic Kft, Gesztenyefa ut 3, 9027 Gyor, Mađarska