levenhuk LabZZ SP30 Astroplanetarium White User Manual

: June 8, 2024
: levenhuk

Table of Contents

LabZZ SP30 Astroplanetarium White
Getting started
Using
Care and maintenance
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SP30 Astroplanetarium White
User Manual levenhuk LabZZ SP30 Astroplanetarium
White

LabZZ SP30 Astroplanetarium White

levenhuk LabZZ SP30 Astroplanetarium White - Overview

Power on/off button
Northern Lights on/off button
Laser on/off button
Moon on/off button
IR Sensor
Power input

levenhuk LabZZ SP30 Astroplanetarium White - Overview
1

1. Power on/off
2. Voice control mode on/off (only valid in Blue-tooth mode)
3. Brightness adjustment
4. Volume up
5. LED red
6. Previous track
7. LED blue| 8. Volume down
9. Northern lights adjustment
10. Timer on/off
11. Set the timer for hour
12. Set the timer for hours
13. Moon adjustment
14. Laser adjustment| 15. LED white
16. Pause/resume
17. Next track
18. LED green
19. Reset to Northern Lights default settings
20. Northern lights speed adjustment
21. Bluetooth mode on/off
---|---|---

Do not look at the light source when the device is on. This may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. Children should only use the device under an adult’s supervision.

Getting started

Install batteries in the remote control. Connect the power cable to the device and the DC adapter via a USB plug and connect to the AC power supply. Press the power on/off button (1) on the remote control (Fig. 2) or on the device body (Fig. 1). Attention! The device operates from the AC power supply, as the voltage of the computer’s USB port is insufficient for the proper operation of the device.
Caution! Please remember that mains voltage in most European countries is 220—240V. If you want to use your device in a country with a different mains voltage standard, rememberthat use of a converter is absolutely necessary.

Using

Choose the right place to project an image: a plain white ceiling or wall will give the best effect. The optimal distance from the astroplanetarium is approx. 1.5—2m. Place the device on a flat surface. Turn the light off and close the curtains to make the room dark. Wait for 5—10 minutes to let your eyes adjust to the darkness. Turn the power on and choose the desirable projection mode.
When using the remote control, make sure that it is pointed at the infrared sensor of the astroplanetarium (5, Fig. 1).

Setting the timer. Use buttons (11) and (12) on the remote control (Fig. 2) to select the duration of operation. Use button (10) to turn off the timer.
Shutdown utility. If the timer is not set, the device will automatically turn off after 4 hours of operation.
Bluetooth connection. Press the Bluetooth button (21) on the remote control. Turn on the Bluetooth mode on your smartphone. Find the “AC6923” device and connect to it.
Bluetooth music. The device can be used to play music being connected to a smartphone via Bluetooth. Use the buttons (6) and (17) on the remote control to change tracks. Use buttons (4) and (7) to adjust the volume.
Reset to default settings. Unplug the device to restore factory settings. As long as the astroplanetarium is connected to the power supply, it memorizes the last used settings even after the power is turned off.

Care and maintenance

The device is suitable for indoor use only. The device is not waterproof. To clean the surface of the device, unplug the device. Use only a dry, soft cloth for cleaning. Strictly follow the instructions and do not disassemble or drop the device as it may result in a loss of functionality.
Warranty: lifetime. For further details, please visit our web site: www.levenhuk.com/warranty

Specification

Laser wavelength	523nm
Power supply	astroplanetarium: DC adapter 5V, not less than 2A (in the kit,

EU plug) remote control: 2 AAA batteries (not included)
Projection area| up to 80m²/860ft²

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

levenhuk.com
Levenhuk Inc. (USA):
928 E 124th Ave. Ste D, Tampa, FL 33612, USA,
+1 813 468-3001,
[email protected]
Levenhuk Optics s.r.o. (Europe):
V Chotejně 700/7, 102 00 Prague 102, Czech Republic,
+420 737-004-919,
[email protected]
Levenhuk®, LabZZ® are registered trademarks of Levenhuk, Inc.
© 2006—2022 Levenhuk, Inc. All rights reserved.
20210830