dynabook W90 Silent Wireless Mouse User Manual

: June 9, 2024
: dynabook

Table of Contents

dynabook W90 Silent Wireless Mouse
Product Information:
Product Usage Instructions:
Introduction
Functional Introduction
Installing the batteries
Setup the connection between the receiver and the mouse
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dynabook W90 Silent Wireless Mouse

Product Information:

Product Name: Dynabook Mouse

Model Number: GM9044910110

Frequency Band(s): 2.408GHz – 2.474GHz

Max. Radio-frequency Power Transmitted: 0dBm

CE Marking: Yes

FCC Approval: Yes

Manufacturer: Dynabook Europe GmbH

Manufacturer Address: Stresemannallee 4b, 41460 Neuss,
Germany

Official Website: https://us.dynabook.com/

Product Usage Instructions:

Take off the battery cover.
Remove the nano receiver from the mouse.
Insert AAA batteries as shown inside the battery compartment.
Replace the cover.
Plug the nano receiver into the USB port of your computer.
If the mouse is not working, put it into pairing mode by re-plugging the receiver into the USB port of your computer. If the mouse does not work after 15 seconds, pair them again. (The receiver has auto-pairing function).
The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.
The Low Power indicator will start to blink when the batteries’ power of the mouse is low.
Disconnect this product before cleaning.
Do not immerse any part of this product in water or other liquid. Do not spray liquid on this product or allow excess liquid to drip inside.
Do not use this product if it has sustained any type of damage.
Please read the user’s manual before installing the product.

GM9044910110 us.dynabook.com

dynabook-W90-Silent-Wireless-Mouse-01

Introduction

Welcome and thank you for choosing a dynabook product. For information about your product, visit us.dynabook.com.

Important Safety Instructions
To protect against risk of fire, bodily injury, electric shock or damage to the equipment:

Do not immerse any part of this product in water or other liquid.
Do not spray liquid on this product or allow excess liquid to drip inside.
Do not use this product if it has sustained any type of damage.
Disconnect this product before cleaning.

CAUTION
To use this product properly, please read this user’s manual before installing.

Functional Introduction

Left button
ON/OFF Switch
Right button
Optical Sensor
Scrolling Wheel
Battery Cover
LED Indicator
Nano Receiver

Installing the batteries

Step 1: Take the battery cover off.
Step 2: Remove the nano receiver from the mouse. See .
Step 3: Insert the batteries as shown inside the battery compartment.
Step 4: Replace the cover.
Warning
Please insert the battery with the correct position according to the instruction labeled on the mouse.

Setup the connection between the receiver and the mouse

Plug the nano receiver into the USB port of your computer. See .
If the mouse is not working, please put it into pairing mode.
Pairing: Re-plug the receiver into the USB port of your computer. If the mouse does not work after 15 seconds, pair them again. (The receiver has auto pairing function).The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver.
When the batteries’ power of the mouse is low, the Low Power indicator will start to blink.

Mouse Indicator

LED is on : Power ON
LED blinking : Low Battery Warning
LED blinks 8 sec.
Pairing (LED OFF when paired or failed after 8 sec.)
Frequency band(s) : 2.408GHz – 2.474GHz

Max. radio-frequency power transmitted in the frequency band(s)

Dynabook Support

https://support.dynabook.com/

CE compliance

This product is carrying the CE mark in accordance with the related European Directives. Responsible for CE marking is Dynabook Europe GmbH, Stresemannallee 4b, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on the website: http://emea.dynabook.com/product-conformity

FCC information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications made to this equipment, not expressly approved by Dynabook or parties authorized by Dynabook could void the user’s authority to operate the equipment.

FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

California Prop 65 Warning
This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Contact for the U.S.
5241 California Avenue, Suite 100 Irvine, California, USA, 92617 Telephone: 949-583-3000
©2022 Dynabook Inc. All rights reserved.