ET2 E23412-01PC Soprano 24 Inch LED Bath Vanity Installation Guide

June 8, 2024
ET2

**ET2 E23412-01PC Soprano 24 Inch LED Bath Vanity Installation Guide

**

Before Getting Started

  • Read the instructions carefully prior to assembling the product
  • When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
  • Carefully remove all packaging materials and retain for future use.
  • Keep all hardware parts and packaging out of reach of small children
  • Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
  • Ensure that you have all required contents for complete assembly
  • Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
  • Do not over tighten the screws and bolts as this may damage the threads
  • Do not let children play with this product.

Risk of suffocation! Keep any packaging materials away from children.

Lamp Care Instructions

  • Carefully read through the instruction sheet before assembly and using the product
  • Caution there is a risk of shock. Disconnect from power source before assembling or cleaning
  • Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
  • Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
  • Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

  • On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
  • For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
  • Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
  • Periodically (every 90 days) make sure that the screws are fully tightened.
  • Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before getting,started,ensure the package contains the following components:

  • Fixture
    Package contents

  • Mounting Bracket

  • Screws #5-32 x 1.25″

  • *Glass-D2.0″L21.65** ”

  • Bolts

  • Wire nuts

  • Bolts

Assembly Instruction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals