Sanyipace WP9603 Sewer Pipeline Drain Inspection Camera User Manual

June 15, 2024
Sanyipace

Sanyipace WP9603 Sewer Pipeline Drain Inspection Camera

Attentions

  1. Please read the manual carefully before using it.
  2. Handle it carefully during operation, avoid throwing down or pressing it heavily.
  3. If the users disassemble or deliberately damage the machine, it will beyond the warranty. 4. Please keep distance when charging
  4. Turn off the device and unplug all the cables after using.
  5. If your device is not in accordance with some content on the manual, it may because device is upgraded, please refer to the device itself.

Product Highlights

  1. 9 inch collor TFT LCD Screen.
  2. High resolution camera lens, up to 1080p Clear picture.
  3. With 12 adjustable LED beads on the camera lens to brighten the dark environment.
  4. High tenacity fiberglass cable, waterproof andante-corrosion/cold / tensile.
  5. With length scale on the cable
  6. Rechargeable 6000mah lithium battery.
  7. Range of Application: Water-supply pipe blocking/leakage inspection; Air-conditioner pipe, pipeline vacuum system, plumbing pipe inspection; Buildings, Road sunken, Municipal
    engineering inspection

Product Specification

Item Parameter
Charger AC 100-240VDC12.6V
Battery Lithium battery 12V
Continuous use time for battery Approximate 6h-8h
Investigation depth 20M/30M/50Moptional
Cable Material High tenacity fiberglass
Camera light source high white light
Camera material Stainless steel
Menu languages Multi-language
Camera picture Color
Monitor Screen Type 9” Color TFTLCD
Monitor Resolution 1080 x 720 pixels

Details Information of the Parts

Camera

  1. metal contact chip
  2. spring
  3. highlight white LED
  4. camera lens
Item Parameter
Camera diameter 0.9in/23mm
With the tube protective shell >25MM
Camera light source 12pcs LED with high while light (adjustable)
Camera working voltage 5V
Lights working voltage 12V
Waterproof level IP68
Camera material stainless steel
Camera protective cover size 1.1in1.6in/29mm40mm
Camera pulley size pulley size 1.6in3.5in/40mm*90mm

Monitor

SCREEN SUPPORTS VERTICAL 180° AND HORIZONTAL 360° ROTATION

Charger

Cable Coil

System Installation

  1. Important tips: please make sure the device was turned off before connecting the camera and the monitor
  2. Connect camera – coil -monitor.
  3. Turn on the power switch on the side of the screen, the indicator light on the monitor bright up means device is turned on.
  4. Install the protective shell slightly according to your needs and put it into the pipe, rotate coil to release the cable, push camera lens moving in the pipe
  5. Adjust LED light brightness according to your need.
  6. After use, pull the cable back carefully and rotate the coil to reel the cable, turn off the power switch, take out the cameramen’s, use a clean, soft and dry cloth to clear it up and put it back in aluminium case.

Functions of Buttons on the Screen

  1. REC/-: press to start recording videos/ capturing pictures, or press it to confirm
  2. PLAY/+: switch video recording and picture capturing mode, or back to home page
  3. MENU/EXIT: Press it to select setting options, or exit
  4. “>” and “<”: press it to choose sub-options; zoom+/- when video recording
  5. Power: turn on/off the screen
  6. TF Card slot: press to pop out the memory card(max support 32GB memory card)

How to record a video?
(switch to video record mode) Press “PLAY/+” until theft upper corner of screen shows the video recording icon , presser/-to start and stop recording. Or press “Menu” to find out the “record”, press “REC/-” to start video recording
(audio recording is turned on by default when device is in video recording mode. Below are the steps to turn off audio record: press “Menu” repeatedly until you find “Video Play back”, press “<” button skip to the “Record Audio”, press “REC/-“to goon, press “>” to choose “off” and press “REC/-” to confirm.)

How to take photos?
(switch to take snapshot mode) Press “PLAY/+” until the left upper corner shows the take photo icon , press REC/- to take photo. Or press “Menu” find out the “snapshot”, press “REC/-” to take photo

Product Components and Accessories

Recharging

When the battery power is low, it needs charging, and the method is as below:

  1. take out the charger cable, plug it into the charger port, another end plug into an AC100V-240V AC socket
  2. The indicator on the charger is a red light that means charging, it turns green light when fully charged. Usually, the charging time is 4-5 hours.

Note :
1. Charging the device as soon as possible when it is going to be out of power, because the battery may be damaged easily for overuse. 2. Do not use the device when charging, and don’t overcharge

Contact Us

Go to our website to download the user manual or view more products: https://www.sanyipace.com

Website After-sale: service@sanyipace.com
Amazon After-sale: sanyimrchan@gmail.com
Facebook: Sanyipace
WhatsApp: +86 137 1399 9105

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Sanyipace User Manuals

Related Manuals