Sanyipace U88 Sewer Camera Drain Camera for Plumbing Repair User Manual
- June 14, 2024
- Sanyipace
Table of Contents
**Sanyipace U88 Sewer Camera Drain Camera for Plumbing Repair User Manual
**
Attention: The illustrations and screenshots of this manual are to explain the product’ operation, which may be a little different from actual products due to the products’ version upgrades and different production batches. If the content in this manual does not match your machine, please refer to the machine!
Note
a. Please read the manual carefully before using the product.
b. Handle the device with care when operating, do not drop or pushhard.c.
c. Do not dismantle the machine without permission.
d. Please turn off the monitor and disconnect the device after use.
e. Before inserting the TF card into the device, please back up the
information on the TF card to avoid loss of information.
f. Do not cut off the power suddenly during recording and playback,
otherwise, the product and video files may be damaged
Application
- pipe dredging machine
- Pipe inspection camera Pipe tool
- underground pipelines, air conditioning pipelines, oil and gaspipelines4: Rescue work in a small space
- For underground exploration
- Underwater riverbed research
- Underground TV
Specification
—Camera and Cable—
Sensor :1/3 CMOS
Resolution: 1000TVL
Camera Diameter: 23mm/50mm rotate camera ( optional)
Depth/Material: 9mm diameter (80m – 160m fiber tube optional)
LED (Brightness can be adjustable): 23MM camera head: 12pcsWhiteLED.50MM
camera head: 8pcs White LED
Angle: 120 degree
Camera Material: stainless steel/ IP68 Waterproof
Camera Type: 23MM : build-in 512HZ Locator. 50MMrotate camera:
build-in 512HZ Locator,support 360 degrees horizontal rotate&145degrees
vertical rotate
Protective cover: 23MM
camera: 38MM 28MM & 90MM 28MM. 50MMcamera with: 65mm * 100mm
Applicable pipe diameter: 23MM camera for ø30- 200mm. 50MM rotating
camera for ø80- 600mm
—LCD Monitor—
Size: 9inch
Function: Video record/audio/photo/power display/ meter counter/keyboard
input (support English)
Camera/Monitor image: Color
Monitor input voltage: DC 12V
TF Card: Max support 16 GB card, includes 8G card
Display Resolution: 1024*600 IPS
Menu: Chinese /English Optional
Display Operation: Press button
Video format: AVI
Photo format: JPG
Operate Temperature: -20-60 degree
Storage Temperature: -30-80 degree
—Control Panel—
Switch ON/OFF
Five-speed LED adjustment
Meter/feet conversion function
Meter Cleared function
keyboard input
Charger: D1000VAC-240VAC DC 12.6V 1000MA
Battery capacity: Lithium battery 12V 4500AH
Battery working time: about 6-8 hours
—Mounting function—
With wheels, easy to move
LCD Monitor Operation
TF card: including 16GB, maximum support 128GB card Built-in microphone and speaker
Display Operation : – Turn On
Connect all the cables of the device, turn on the battery switch button and
press the power button on the screen, and the system starts.
– Menu Settings (need to exit REC mode):
Press the “MENU/EXIT” key to enter the menu settings. Press “<” “>” to select,
press “Rec/-” to confirm, and press “EXIT” toreturn .Allow operating time
setting/playback setting/display setting/recording setting/system setting.
– How to Record Video:
Press “REC/-” to start recording (video with audio), press againto stop
recording.
– How to Playback Images/Videos:
Press “PLAY/+” to enter image browsing, press it again to enter video
playback, press “<” “>” button to select, press “REC/-” to play, press “REC/-”
again to exit.
– How to Take Photos:
Press “>/PHOTO” to capture a photo, press one at a time.
– How to Zoom the Image While Recording:
Press “<” to zoom in 0-5 times, press the 6th time to return to normal (0).
– How to Delete Pictures or Videos:
Press “PLAY/+” to enter photo/video viewing, press “>” to select one of the
pictures or videos, press “MENU/EXIT” and “>” to enter delete or all delete
options, press “REC/-” to confirm, press “PLAY/+” again to exit.
– How to Modify Video Length:
The recorded video will be divided into fixed-length videos and stored in the
memory card, and the default length is 3 minutes. You can adjust it up to 10
minutes. Press “MENU/EXIT” and “>/PHOTO” to select “Video Menu”, press “REC/-”
to change it to 1mins, 3mins, 5mins, or 10mins, and press “Menu” to exit after
setting.
– How to Set Recording without Audio:
Press “MENU/EXIT” and “>” to select “System Settings”, press “REC/-” to enter
sub-options, press “>” to find “Sound Settings”, press “REC/-” to adjust turn
on or off, press “MENU/EXIT” to quit.
Counter Function
Counter Reset Button
F7 key: Counter Cleared
F4 key: Feet/Meter Switch
Before using this function, please press the CLEAR button or F7keytoclear the counter information. You can toggle the display in feet or metersby pressing the F4 key. It will start counting feet/meters whenthecoil rotates, and display it on the screen in real time.
Control Panel & Key board Input
-
Power charging port
-
Battery switch
(Note: please turn off the switch when not inuse) -
Counter reset button
-
LED brightness adjustment (0-5 gear)
-
ower indicator light
-
Second keyboard USB port (The first USB Port is under thecontrol panel)
-
Esc: Clear characters (F1,F2,F3 only for 360 rotating camera)
F1 key: Rotate speed adjustment (low, middle, high)
F2 key: Horizontal rotation automatic/ manual -
F3 key: Vertical rotation automatic/ manual
-
F4 key: Meter/Feet switch
-
F5 key: OSD switch (on-screen display)
-
F6 key: LED brightness adjustment (0-5 gear)
-
F7 key: Clear counter
-
F9 key: Factory setting (Press F9 then input password “3131” toentersettings, pres
-
UP/Down to select cable’s diameter and meters, Left/Right to select model (U16 or U88 is the correct model), thenpressF9to save settings and exit)
The function of the keyboard: During working, you caninput text/symbols/numbers to mark events.
Camera/Cable Mounting
- 360° Rotating HD camera
50MM Rotate camera
8pcs White Leds
**
**Horizontal rotation 145° + rotation 360°
- 23MM self-balancing 512HZ camera
23mm self-balancing HD camera **
12pcs White Leds
**
Stainless steel waterproof body
Spring design (can be bent)
-
Cable Mounting
-
Wire Diagram
A: Install and tighten the camera head
B-C: Connect the cable and tighten it
Trouble & Troubleshooting
Trouble | Troubleshooting |
---|---|
No power | a. Check whether each interface is connected correctly; |
b. Check whether the battery is out of power, check the power display.
Can’t be charged| a. Is the DC adapter plug-in correctly;
b. Check if the indicator light of the DC adapter ison.
Indicator light is on but no image| a. Check whether the connecting wires
arewell connected and whether the camera is tightened;
b. Check whether the battery is fully charged, and try again after fully
charged.
Can’t record videos| a. Whether the SD card is inserted correctly;
b. Insufficient SD card memory;
c. Check whether the power off during there recording process
Recording videos in black and white color| a. Turn off the power and turn
it on to confirm the problem again;
b. Check that connections are well connected and make sure all cables are
properly connected;
c. Adjust the camera probe and turn it slowly to confirm whether it is
loose
LED lights not working| a. Check whether the LED lights setting is turned on,
pressing the LED adjustment button on the panel or F6 to adjust the
brightness;
b. Tighten or loosen the camera probe slowly to check if it works;
c. Use a voltage tester to test all connectors, find out the damaged part
and contact Sanyipa cetodeal with it.
Warranty
We provide a one-year product quality warranty from the date of purchase and
provide free lifetime product technical support. For normal fault so quality
problems within the warranty period, we provide free replacement or repair
services. For damage caused by manual operation, we will charge the cost of
product parts for repair. Our technical support tamest your service 24 hours a
day. If you encounter any problems during use, please feel free to contact us.
—-Contact Us—- Go to our website to download the user manual or view more
products:
https://www.sanyipace.com
service@sanyipace.com