Sanyipace F5800ADJKABTX Professional Sewer Inspection Camera User Manual

: June 15, 2024
: Sanyipace

Sanyipace F5800ADJKABTX Professional Sewer Inspection Camera

Product Information

Specifications

Model: F5800ADJKABTX
Sensor: 1/3 CMOS
Resolution: AHD 1080P
Camera Diameter: 0.9in/23mm (built-in 512Hz transmitter, self-leveling)
Camera Light Source: 12pcs 1W high white LED (adjustable)
Camera Angle: 145 degrees
Camera Material: Stainless steel, sapphire lens, IP68 waterproof
Camera Protective Cover Size: 1.5in1.1in/38mm28mm
Camera Pipe Pulley: 5.1in1.1in/130mm28mm
Cable Diameter and Material: 230ft/70m and 328ft/100m of 0.2in/5mm harder high elastic cable; 164ft/50m of 0.28in/7mm hardest high elastic cable (optional)
Battery Charger: 100VAC-240VAC/DC 12.6V 1000MA
Battery: Lithium battery 4500mAh
Battery Continuous Working Time: About 6-8 hours

Product Usage Instructions

Scope of Product Use
The Sewer Inspection Camera System can be used for the following purposes:

Household pipeline blockage inspection
Pipe inspection camera, pipeline tools
Underground water pipes, HVAC systems, oil and gas pipelines
Rescue operations in narrow spaces
For underground exploration
Scientific research on underwater riverbeds
Sewer system inspection
Any other hard-to-reach locations/areas

Camera and Cable

Sensor: 1/3 CMOS
Resolution: AHD 1080P
Camera Diameter: 0.9in/23mm (built-in 512Hz transmitter, self-leveling)
Camera Light Source: 12pcs 1W high white LED (adjustable)
Camera Angle: 145 degrees
Camera Material: Stainless steel, sapphire lens, IP68 waterproof
Camera Protective Cover Size: 1.5in1.1in/38mm28mm
Camera Pipe Pulley: 5.1in1.1in/130mm28mm
Cable Diameter and Material: 230ft/70m and 328ft/100m of 0.2in/5mm harder high elastic cable; 164ft/50m of 0.28in/7mm hardest high elastic cable (optional)

Battery Control Box
The battery control box features the following:

Video Output
Power Output
LED Brightness Adjustment (0-5 gear)
Count Clear
Keyboard
USB Port
Video Cable Port
DC Adapter Charging Port
Switch ON/OFF (Note: please turn off when not in use)

Battery

Charger: 100VAC-240VAC/DC 12.6V 1000MA
Battery: Lithium battery 4500mAh
Battery Continuous Working Time: About 6-8 hours

LCD Monitor Operation
To operate the LCD monitor, follow these instructions:

How to Record Video: Press REC/- to start recording (video with audio), press again to stop recording.
How to Playback Images/Videos: Press PLAY/+ to enter image browsing, press it again to enter video playback, press button to select, press REC/- to play, press REC/- again to exit.
How to Take Photos: Press >/PHOTO to capture a photo, press one at a time.
How to Zoom the Image While Recording: Press to select one of the pictures or videos, press MENU/EXIT and > to enter delete or all delete options, press REC/- to confirm, press PLAY/+ again to exit.
How to Modify Video Length: The recorded video will be divided into fixed-length videos and stored in the memory card, and the default length is 3 minutes. You can adjust it up to 10 minutes. Press MENU/EXIT and >/PHOTO to select Video Menu, press REC/- to change it to 1mins, 3mins, 5mins, or 10mins, and press Menu to exit after setting.
How to Set Recording without Audio: Press MENU/EXIT and > to select System Settings, press REC/- to enter sub-options, press > to find Sound Settings, press REC/- to adjust turn on or off, press MENU/EXIT to quit.

Counter Function
To use the counter function:

Before using this function, please press the CLEAR button or F7 key to clear the counter information.
You can toggle the display in feet or meters by pressing the F4 key.
It will start counting feet/meters when the coil rotates, and display it on the screen in real time.

FAQ (Frequently Asked Questions)

What should I do if I encounter any issues with the product?
Please contact us at first time if you have any issues with the product. You can reach us at SanyiMrchan@gmail.com.
The illustrations and screenshots in the manual do not match my machine. What should I do?
If the content in this manual does not match your machine, please refer to your machine for accurate instructions and operation.

Attention: The illustrations and screenshots of this manual are to explain the product’s operation, which may be a little different from actual products due to the products’ version upgrades and different production batches. If the content in this manual does not match your machine, please refer to the machine!

Notice

Please read the manual carefully before using the product.
Handle the device with care when operating, do not drop or push hard.
Do not dismantle the machine without permission.
Please turn off the monitor and disconnect the device after use.
Before inserting the TF card into the device, please back up the information on the TF card to avoid loss of information.
Do not cut off the power suddenly during recording and playback, otherwise, the product and video files may be damaged.

Scope of Product Use

Household pipeline blockage inspection
Pipe inspection camera, pipeline tools
Underground water pipes, HVAC systems, oil and gas pipelines
Rescue operations in narrow spaces
For underground exploration
Scientific research on underwater riverbeds
Sewer system inspection
Any other hard-to-reach locations/areas

Product Specification

Camera and Cable
- Sensor: 1/3 CMOS
- Resolution: AHD 1080P
- Camera diameter: 0.9in/23mm (built-in 512Hz transmitter, self-leveling)
- Camera light source: 12pcs 1W high white LED (adjustable)
- Camera angle: 145 degrees
- Camera material: stainless steel, sapphire lens, IP68 waterproof
- Camera protective cover size: 1.5in1.1in/38mm28mm
- Camera pipe pulley : 5.1in1.1in/130mm28mm
- Cable diameter and material: 230ft/70m and 328ft/100m of 0.2in/5mm harder high elastic cable; 164ft/50m of 0.28in/7mm hardest high elastic cable (optional)
Monitor Screen—
- Size: 10.1-inch
- Camera/monitor picture: IPS LCD color
- Function: Video recording, audio recording, speaker, capture photos, 5X digital zoom, battery level display, depth counter, 512Hz transmitter, self-leveling, keyboard input (support English), etc.
- Monitor input voltage: DC 12V
- SD card: package includes 16GB card, support max 128GB
- Display resolution: 1024*600 IPS
- Menu Language: Chinese/English/Russian/French/German optional
- Screen port: power input/video
- Screen operation: press buttons
- Video format: AVI
- Photo format: JPG
- Working temperature: -4~140℉/-20~60℃
- Storage temperature: -22~176℉/-30~80℃
Battery Control Box
- Video Output
- Power Output
- LED Brightness Adjustment (0-5 gear)
- Count Clear
- Keyboard USB Port
- Video Cable Port
- DC Adapter Charging Port
- Switch ON/OFF (Note: please turn off when not in use)
Battery
- Charger: 100VAC-240VAC/DC 12.6V 1000MA
- Battery: lithium battery 4500mAh
- Battery continuous working time: about 6-8 hours

LCD Monitor Operation

TF card: including 16GB, maximum support 128GB card Built-in microphone and speaker

Display Operation

Turn On
Connect all the cables of the device, turn on the battery switch button and press the power button on the screen, and the system starts.
Menu Settings (need to exit REC mode):
- Press the “MENU/EXIT” key to enter the menu settings.
- Press “<” “>” to select, press “Rec/-” to confirm, and press “EXIT” to return. Allow operating time setting/playback setting/display setting/recording setting/system setting.
How to Record Video:
Press “REC/-” to start recording (video with audio), press again to stop recording.
How to Playback Images/Videos:
Press “PLAY/+” to enter image browsing, press it again to enter video playback, press “<” “>” button to select, press “REC/-” to play, press “REC/-” again to exit.
How to Take Photos:
Press “>/PHOTO” to capture a photo, press one at a time.
How to Zoom the Image While Recording:
Press “<” to zoom in 0-5 times, press the 6th time to return to normal (0).
How to Delete Pictures or Videos:
Press “PLAY/+” to enter photo/video viewing, press “>” to select one of the pictures or videos, press “MENU/EXIT” and “>” to enter delete or all delete options, press “REC/-” to confirm, press “PLAY/+” again to exit.
How to Modify Video Length:
The recorded video will be divided into fixed-length videos and stored in the memory card, and the default length is 3 minutes. You can adjust it up to 10 minutes. Press “MENU/EXIT” and “>/PHOTO” to select “Video Menu”, press “REC/-” to change it to 1mins, 3mins, 5mins, or 10mins, and press “Menu” to exit after setting.
How to Set Recording without Audio:
Press “MENU/EXIT” and “>” to select “System Settings”, press “REC/-” to enter sub-options, press “>” to find “Sound Settings”, press “REC/-” to adjust turn on or off, press “MENU/EXIT” to quit.

Counter Function

Before using this function, please press the CLEAR button or F7 key to clear the counter information. You can toggle the display in feet or meters by pressing the F4 key. It will start counting feet/meters when the coil rotates, and display it on the screen in real time.

Keyboard Input

Esc: Clear characters
F4 key: Meter/Feet switch
F5 key: OSD switch (on-screen display)
F6 key: LED brightness adjustment (0-5 gear)
F7 key: Clear counter
F9 key: Factory setting (Press F9 then input password “3131” to enter settings, press ⑦ UP/Down to select cable’s diameter and meters,
Left/Right to select model (5800 is the correct model), then press F9 to save settings and exit)
The function of the keyboard: During working, you can input text/symbols/numbers to mark events.

Battery & Adapter

The battery is built into the control panel with a capacity of 4500mAh, and the screen displays the battery power status. When the screen shows that the power is lower than 9V, please charge the battery.

Note: To ensure a longer battery life, please charge it in time; otherwise, the battery may be damaged and cannot be recharged. The fully charging time is about 5-6 hours.

Camera with Self-leveling Function & 512Hz Transmitter

Camera probe size details:
The Camera probe has a built-in 512Hz transmitter, which transmits a 512Hz frequency signal through a built-in chip, compatible with any 512Hz pipe locator.

Transmit Frequency: 512Hz
Output Waveform: sine wave
Transmit Distance: about 16.4ft/5m
Self-leveling can be defined as the ability of any instrument to level itself regardless of the angle of inclination.
Camera probe is equipped with a self-leveling gravity bearing on the camera probe that could automatically adjust direction and level when taking videos/pictures to deliver upright pictures all time, helping users to position.
12 adjustable LED lights on the camera probe
There are 5 modes to adjust the brightness, press the LED button on the battery control box or the F6 key on the keyboard to adjust.

Cable Coil

New stable and strong coil structure with steel bearing inside, can easily release or coil the cable with less time and force.

How to release the cable:
Take out the cable from the bracket, then pull the cable to release.
How to coil the cable:
Push the cable inward to coil the cable back while using your other hand to hold and rotate the coil, then lock the cable in the holder.

Device Installation

Connect the Y-type split video cable on the screen to the battery box port as shown in the picture.

Connect the video cable from the coil to the battery box as shown in the picture below, and tighten it.10. Device Installation

Connect the Y-type split video cable on the screen to the battery box port as shown in the picture.

Connect the video cable from the coil to the battery box as shown in the picture below, and tighten it.

Install the camera probe to the fiberglass cable end. Finally, switch on the button on the battery box to turn on the battery and then press the button on the screen to turn on the screen.

The following are the steps to install the pulley/cover

Structure & Accessories

Plastic Box*1
10.1-inch IPS Screen*1
16GB SD Card*1
Metal Bracket *1
Lithium Battery *1
Camera*1
Fiberglass Cable*1
Keyboard*1
5in/130mm Pipe Pulley*1
1.5in/38mm Protective Cover*1
DC Adapter*1
Screwdriver*1
Instruction*1

Trouble & Troubleshooting

No power
- Check whether each interface is connected correctly;
- Check whether the battery is out of power, check the power display.
Can’t be charged
- Is the DC adapter plug-in correctly;
- Check if the indicator light of the DC adapter is on.
Can’t record videos
- Whether the SD card is inserted correctly;
- Insufficient SD card memory;
- Check whether the power off during the recording process.
Recording videos in black and white color
Adjust the LED light button to the appropriate brightness, observe the screen display, and select a brightness that is clearer and more colorful.
No signal, screen turns blue
- Turn off the power and turn it on to confirm the problem again;
- Check that connections are well connected and make sure all cables are properly connected;
- Adjust the camera probe and turn it slowly to confirm whether it is loose.
LED lights not working
- Check whether the LED lights setting is turned on, adjust the LED adjustment button on the battery box or F6 to adjust the brightness;
- Tighten or loosen the camera probe slowly to check if it works;
- The battery is going to out of power, recharge battery and try again;
- Use a voltage tester to test all connectors, find out the damaged part and contact Sanyipace to deal with it.

Warranty

We provide a one-year product quality warranty from the date of purchase and provide free lifetime product technical support. For normal faults or quality problems within the warranty period, we provide free replacement or repair services. For damage caused by manual operation, we will charge the cost of product parts for repair. Our technical support team is at your service 24 hours a day. If you encounter any problems during use, please feel free to contact us.

Contact Us