Sanyipace 9723WF Wireless Pipe Sewer Pipeline Inspection Camera User Manual
- June 15, 2024
- Sanyipace
Table of Contents
Sanyipace 9723WF Wireless Pipe Sewer Pipeline Inspection Camera
Attention: The illustrations and screenshots of this manual are to explain product’s operation, which may be little different from actual products due to the products’ version upgrades and different production batches. If the content in this manual does not match your machine, please refer to the machine!
Note
- Please read the manual carefully before using products.
- Handle it carefully during operation, Do not drop or push it hard
- Do not dismantle the machine without permission.
- Please turn off the display and disconnect the device after using it.
- Please copy the information of TF memory card before connecting it to device
- Do not suddenly cut off the power during recording and playing, which may cause damage to product and video files.
Range of Product use
- Home pipe blocking inspection.
- Pipeline Inspection Camera, pipeline tools.
- Underground water pipe, HVAC system, oil and gas pipeline.
- Rescue operations in a small space.
- For underground expedition.
- Underwater river bed scientific research.
- Sewer system inspection
- Any other position/area that is hard to reach.
Product Specification
Camera and cable
- Sensor: 1/3 CMOS
- Camera Size：22(MM)* 42(MM).
- Charger: 100VAC-240VAC DC 12.6V 1000MA.
- Battery: lithium battery 4500mAH.
- Battery continuous working time: about 6-8 hours.
- Cable Length: 20M 30M 50M (optional)/high elastic cable(diameter 5MM). Camera line source: 6pcs 1W high white LED(adjustable).
- Camera angle and clarity:145 degree / 1000TVL.
- Camera material: stainless steel /IP68 waterproof camera.
- Camera protective cover size /material: 38mm*28mm/ plastic steel.
Display
- Size: 7inch
- Camera /monitor picture: Color
- Monitor input voltage: 12V DC
- Display resolution: 16:9, 960*480.
- System Language: Chinese/English optional.
- Display video format: AVI with Year,Month,Date,Time and Seconds Display operate: button.
- Working temperature: -20-60 ℃.
- Storage temperature: -30-80 ℃.
Product Parts Details
7 inch Screen
V1/V2: video channels switch, it is useless for this (9723WF) product
- Rotate Button: press it to rotate the image
- MENU Button
- Brightness setting: Press MENU button enter, press +/- to set, then press MENU exit.
- Contrast setting: press MENU button twice enter contrast setting, press+/- to set, then press MENU exit.
- Color setting: Press MENU three times to enter settings, press +/- to set,then press MENU exit.
4500mah Battery
Camera (Waterproof Level IP68)
Cable Coil
Put the cable on the hook, pull to release or push back to coil the cable
.
Accessories list
- Aluminum box *1
- Charger *1
- Camera Head *1
- Cable Coil *1
- Battery*1
- User Manual
- Camera protective cover*1
- Camera Pulley*1
- Screen*1
- Mini Screwdriver*1
- Connection
Device Install
Connect the device according to the wiring diagram, then turn on and using
.
APP Installation & Operation
WIFi Signal Receive Distance: Max to 100 meters. Compatible with Android & IOS
- APP download: Scan the QR code on manual or on the battery pack, then download and install.
- APP are workable: WIFI Image and WIFI fish. the following steps are based on WiFi Image)
- Connect all the parts and turn on the power supply.
- After about 15 seconds, Click the “WLAN” setting on your mobile device, found “WIFIImage_***” device (as picture).
- Connect the wifi hotspot, enter the initial password (default password: 88888888), select “Connect.” (If APP connects successful between device and mobile phone,it will appear “connected”)
- The next step is back to mobile device interface, click (WIFI Image) icon to run APP.
- Pop-up the window ( for example. 192.168.3.1,) click to enter into
- If pop-up the image, then the operation is successful.
- The left side shows 5 function keys:
- Photo button
- Record Button
- File browse
- Menu Setting
- Image Zoom
- IN/ZOOM OUT
- MENU Setting, like as picture:
Charger
When the battery is low power(power is less than 20% ),please recharge it, the
recharge time is about 4-5 hours.
Notes: To make sure the battery has longer use age, please recharge it timely; otherwise, the battery may be damaged.
Failure and Diagnosis
| problems / faults | Solutions |
|---|
indicator light on No image
| 1：Check whether each connector is connected and the camera needs to be tightened.
2：Check if the battery is fully charged and try again
after it is fully charged .
No power
| 1：Check whether each connector are connected correct .
2: Battery is exhausted ? check the battery display
Unable to connect to WIFI
| 1.check and confirm whether WIFI is displayed normally.
Restart the power supply to connect to WIFI.
The WiFi connection is complete and restart the APP.
Can not be charged| 1：check the charger indicator light is on? 2：Is the DC plug inserted good ?
Warranty
We provide a 1-year-warranty for the quality of the products from the purchased day and free replacement or repair service for the normal breakdown or quality issue within warranty period. But for the damaged caused by against the manual operation, we would charge the cost of products parts to repair.
Contact Us
- For more products please visit: https://www.amazon.co.uk/sanyipace
- Our Email: support@sanyipace.com
- Facebook: Sanyipace
- WhatsApp: +86 137 1399 9105
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>