Sanyipace F929ADFBAB8R FHD Sewer Camera User Manual

Sanyipace F929ADFBAB8R FHD Sewer Camera

Please contact us at first time if you have issues with theproduct [email protected]

Attention: The illustrations and screenshots of this manual are to explain the product’s operation, which may be a little different from actual products due to the products’ version upgrades and different production batches. If the content in this manual does not match your machine, please refer to the machine!

Notice

• Please read the manual carefully before using the product.
• Handle the device with care when operating, do not drop or push hard.
• Do not dismantle the machine without permission.
• Please turn off the monitor and disconnect the device after use.
• Before inserting the TF card into the device, please back up the information on the TF card to avoid loss of information.
• Do not cut off the power suddenly during recording and playback, otherwise, the product and video files may be damaged.

Range of Product Use

• Household pipeline blockage inspection
• Pipe inspection camera, pipeline tools
• Underground water pipes, HVAC systems, oil and gas pipelines
• Rescue operations in narrow spaces
• For underground exploration
• Scientific research on underwater riverbeds
• Sewer system inspection
• Any other hard-to-reach locations/areas

Product Specification

Camera and Cable

• Sensor: 1/3 CMOS
• Resolution: AHD 1080P
• Camera angle: 145 degrees
• Camera diameter: 0.9in/23mm (built-in 512Hz transmitter, self-leveling)
• Camera light source: 12pcs 1W high white LED (adjustable)
• Camera material: stainless steel, sapphire lens, IP68 waterproof
• Camera protective cover size: 1.5in1.1in/38mm28mm
• Camera pipe pulley: 5.1in1.1in/130mm28mm
• Cable Length: 100ft/30m, 164ft/50m (optional)
• Cable diameter and material: 0.2in/5mm high elastic cable

Monitor Screen

• Size: 9-inch
• Camera/monitor picture: IPS LCD color
• Monitor input voltage: DC 12V
• TF card: package includes 16GB card, support max 128GB Display resolution: 1024*600 IPS
• Menu Language: English/Germany/French optional
• Screen port: power input/video
• Screen operation: press buttons
• Video format: AVI with Year, Month,Date, Time and Seconds Photo format: JPG
• Working temperature: -4~140℉/-20~60℃
• Storage temperature: -22~176℉/-30~80℃

Battery Box

• Charger: 100VAC-240VAC/DC 12.6V 1000MA
• Charging time: about 5 hours
• Battery: lithium battery 12V 4500mAh
• Battery continuous working time: about 6-8 hours

9’’ LCD Monitor Operation

• (Built-in microphone and speaker)

Display Operation

Turn on
Connect each component, turn on the switch button on the battery, and press the power button on the screen, and the system starts working

Menu setting (need to exit the REC mode)
Press MENU to enter, Press “<” “>” to select, press “Rec/- ” to confirm your selection, and Press EXIT to back. you can set display settings/playback/video settings/storage/system settings.

How to zoom in image when recording
Press “<” to zoom in and 5 gears in total, press it 5 times to zoom in to the limit, and at the 6th time press it to return to normal

How to record a video
Press “Rec/- ” to start recording, and press “Rec/- ” again to stop.

How to take a snapshot
Press “>” to take a photo quickly

Video Browsing
Press “PLAY/+” first time to enter photo viewing, press it the second time to enter video playback, and press it again to exit. Press “>” “<” to select, and press “REC/-” to play.

How to delete the picture or video
press “PLAY/+” to enter photo/video viewing, press “>” to choose one of the pictures or videos, press “MENU” and “>” to enter a selection of delete or delete all, and press “REC” to confirm the selection, press “PLAY/+” again to exit.

How to revise the video length of the recording
The recorded video will be divided into fixed-length videos and stored on the memory card, the default duration is 3 minutes, you can revise it to up to 10 minutes. press “Menu” and “>” to choose “Video Menu” and press “REC/-” times to revise it to 5mins, 10mins, 1mins or 3mins, at last press “Menu” to exit

How to turn off the audio record function
Press Menu “Menu” and “>” to choose “system setting”, press “REC/-” go to the sub-option, press “>” to find “sound settings”, press “REC/-” to turn on or off, press Menu to exit

4500mAh Battery

Power Charger

Cable Coil

put the cable on the hook, pull to release or push back to coil the cable .

Remote Controller

Please be noted that the transparent insulating card protects the

battery, you need to remove it before use.

• VIDEO SELECT: function same with the screen button “PLAY/+”
• MODE SELECT: function same with the screen button “REC/-”
• ◀ : function same with the screen button “<”
• ▶ : function same with the screen button “>”

Camera with Self-leveling Function & 512Hz Transmitter

The Camera probe has a built-in 512Hz transmitter, which transmits a 512Hz frequency signal through a built-in chip, compatible with any 512Hz pipe locator.

• Transmit Frequency: 512Hz
• Output Waveform: sine wave
• Transmit Distance: about 16.4ft/5m

Self-leveling can be defined as the ability of any instrument to level itself regardless of the angle of inclination. Camera probe is equipped with a self- leveling gravity bearing on the camera probe that could automatically adjust direction and level when taking videos/pictures to deliver upright pictures all time, helping users to position.

512HZ Locator Detector

The detector locator has a built-in induction coil to receive the magnetic signal from the pipeline, and the coil generates an induced current to calculate the direction and position of the transmitter. The detector locator has two detecting modes: far mode and near mode. Firstly, open the sensitivity to the strongest gear, and switch to far mode (about 16.4ft/5m) to detect and find the signal source, adjust the sensitivity knob, \when its signal is up to the full strongest signal position (far mode), switch to near mode (detecting depth: 3.3ft/1m) to detect until the 512Hz signal reach strongest signal position (near mode).

Detector Locator Technical Parameters

• Receiver Frequency: 512Hz
• Detect Distance: about 16.4ft/5m
• Battery: 3.7V 3000MAH built-in lithium battery
• Charger: 5V 0.5A
• Charger time: about 6 hours
• Battery Indicator: 4 gear, it is flashing when the battery is low
• Battery working time: about 10 hours
• Signal strength: 6 gear
• Speaker: support
• Detect Mode: Far/ Near

How to Use Detector Locator to Detect Camera Position：

• Turn on the detector, set the sensitivity knob to the strongest gear.
• Set it as far mode to detect first. When the signal light is on, it means that you have entered into the 512Hz locator position within 16.4ft/5m.
• Then move forward to the direction of the signal, keep finding and moving to the strongest signal, and try slowly reducing sensitivity, until finding out the position which is the strongest signal when sensitivity is weakest.
• After that, switch the button on the left side of the handle to the near mode and set the sensitivity knob to the strongest gear to continue to detect, keep moving, and find the signal source. when it reaches the strongest signal position, the receiver has entered into the 512Hz transmitter position within 3.3 ft/1 m.

Wire Diagram

Failure and Diagnosis

No power

| a.  Check whether each interface is connected correctly;

b.  Check whether the battery is out of power, check

the power display.

Can’t record

| a.  Whether the SD card is inserted correctly;

b.  Insufficient SD card memory;

c.  Check whether the power off during the recording process.

Can not be charged

| a.  Is the DC adapter plug-in correctly;

b.  Check if the indicator light of the DC adapter is on.

No signal

| a.  Check if the connection is well connected and make sure all cable is correctly connected;

b.  Check the camera head. and slowly rotate the

connection to adjust its tightness.

Recording videos in black and white color| Adjust the LED light button to the appropriate

brightness, observe the screen display, and select a brightness that is clearer and more colorful.

The screen display turn blue

| a.  Check the video cable if wrong connected, and reconnect it to the battery;

b.  The video cable is broken, need to replace the new video cable. contact the seller or our customer service email for help.

The video works ok but the LED doesn’t work

| a.    Check if you turn on the led or not, try to rotate the knob on the battery to adjust the brightness;

b.    Rotate the camera connector a little tighter or looser, and check if it works or not;

c.    Use a voltage tester pen to test all the connectors, find out the broken part, and contact the seller for free replacement.

Warranty

We provide a one-year product quality warranty from the date of purchase and provide free lifetime product technical support. For normal faults or quality problems within the warranty period, we provide free replacement or repair services. For damage caused by manual operation, we will charge the cost of product parts for repair. Our technical support team is at your service 24 hours a day. If you encounter any problems during use, please feel free to contact us.

Contact Us
Go to our website to download the user manual or view more products:https://www.sanyipace.com

• Website After-sale: [email protected]
• Amazon After-sale: [email protected]
• Facebook: Sanyipace
• WhatsApp: +86 137 1399 9105

References

• Sewer Camera, Drain Camera for plumbing repair | SANYIPACE – Sanyipace

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>