Sanyipace WP9603 50M Pipe Camera with DVR 9 Screen Drain Inspection Camera User Manual
- June 14, 2024
- Sanyipace
Table of Contents
Sanyipace WP9603 50M Pipe Camera with DVR 9 Screen Drain Inspection Camera
User Manual
Attentions
- Please read the manual carefully before using it.
- Handle it carefully during operation, avoid throwing down or pressingit heavily.
- If the users disassemble or deliberately damage the machine, it will beyond the warranty.
- Please keep distance when charging
- Turn off the device and unplug all the cables after using
- If your device is not in accordance with some content on the manual, it may because device is upgraded, please refer to the device itself.
Product Highlights
- 9 inch color TFT LCD Screen.
- High resolution camera lens, up to 1080P clear picture.
- With 12 adjustable LED beads on the camera lens to brighten the dark environment.
- High tenacity fibreglass cable, waterproof and anti-corrosion / cold/ tensile.
- With length scale on the cable
- Rechargeable 6000mah lithium battery.
- Range of Application: Water-supply pipe blocking/leakage inspection;
Air-conditioner pipe, pipeline vacuum system, plumbing pipe inspection; Buildings, Road sunken, Municipal engineering inspection
Product Specification
- Charger : AC100-240V DC12.6V
- Battery : Lithium battery 12V
- Continuous use time for batter y:: Approximate 6h-8h
- Investigation dep : 20M/30M/50M optional
- Cable Materia : High tenacity fibreglass
- Camera light source :: high white light
- Camera materia: Stainless steel
- Menu language s: Multi-language
- C amera picture: : Color
- Monitor Screen Type: 9” Color TFT LCD
- Monitor Resolution: : 1024 x 720 pixels
Details Information of the Parts
Camera
- metal contact chip
- spring
- highlight white LED
- cameralens
-
Item: Parameter
-
Camera diameter: 23MM
-
With the tube protective shell: >25MM
-
Camera light source:1 2 LED with high while light(adjustable)
-
Camera working voltage: 5V
-
Lights working voltage: 12V
-
Waterproof level : IP68
-
Camera material: stainless steel
-
Camera protective cover size : 29MM * 40MM
-
Camera pulley size: 40MM * 90MM
Monitor
SCREEN SUPPORTS VERTICAL 180°AND HORIZONTAL 360° ROTATION
Charger
AC: 100-240V
OUTPUT: 12.6V-1000MA
The green indicator means finishing charging
Cable Coil
How to Release the Cable Line
How to Coiled Cable
Length mark on the line
Unlock up The coll can be turned
Lock down Coil restricts rotation
System Installation
- Important tips: please make sure the device was turned off beforeconnecting the camera and the monitor
- Connect camera – coil -monitor.
- Turn on the power switch on the side of the screen, the indicator light onthe monitor bright up means device is turned on.
- Install the protective shell slightly according to your need and put it intothe pipe, rotate coil to release the cable, push camera lens movinginthepipe
- Adjust LED light brightness according to your need.
- After use, pull the cable back carefully and rotate the coil to reel thecable, turn off the power switch, take out the camera lens, use a clean, soft anddrycloth to clear it up and put it back in the aluminium case
Functions of Buttons on the Screen
- REC/-: press to start recording videos/ capturing pictures, or pressit toconfirm
- PLAY/+: switch video recording and picture capturing mode, or backtohome page
- MENU/EXIT: Press it to select setting options, or exit
- “>” and “<”: press it to choose sub-options; zoom +/- when videorecording
- Power: turn on/off the screen
- TF Card slot: press to pop out the memory card (max support 32G Bmemory card)
How to record a video?
(switch to video record mode) Press “PLAY/+” until the left upper corner of
screen shows the video recording icon , press REC/- to start andstoprecording.
Or press “Menu” to find out the “record”, press “REC/-” to start video recording (audio recording is turned on by default when the device is invideorecording mode. Below are the steps to turn off audio record: press”Menu”repeatedly until you find “Video Playback”, press “<” button skip tothe”Record Audio”, press “REC/-” to go on, press “>” to choose “off” andpress”REC/-” to confirm.)
How to take photos?
(switch to take snapshot mode) Press “PLAY/+” until the left upper corner
shows the take photo icon , press REC/- to take photo. Or press “Menu” find
out the “snapshot”, press “REC/-” to take phot
Product Components and accessories
Recharging
When the battery power is low, it needs charging, and the methodisasbelow:
- take out the charger cable, plug it into the charger port, another endpluginto an AC100V-240V AC socket
- The indicator on the charger is a red light that means on charging, it turnsgreen light when fully charged. Usually, the charging time is 4-5 hours.
Note
- Charging the device as soon as possible when it is going tobeout of power, because the battery may be damaged easily for overuse.
- Do not use the device when charging, and don’t overcharge
Warranty
We provide one year warranty for the product, and free replacement within7days for any quality problems. Fromthe day you purchased, we provide free maintenance for the normal breakdown, but for the damage caused by operation against the manual, we will charge for the cost fee for thespareparts to maintain even if product is under the warranty.
Contact Us
For more product please visit https://www.amazon.co.uk/sanyipaceAmazon
After-sale: [email protected]
Facebook: Sanyipace
WhatsApp: +86 137 1399 9105
