AXAGON ACU-PQ22 PD 3.0 and Quick Charger Instruction Manual
- June 8, 2024
- AXAGON
Table of Contents
AXAGON ACU-PQ22 PD 3.0 and Quick Charger
Plug the adapter to computer USB-C output.
http://axagon.eu/produkty/rvc-hi14c#supportLinkGoal
SAFETY AND CORRECT HANDLING
- Ensure that the output parameters of the adapter match the parameters of the powered device.
- Only use good quality and undamaged USB cables.
- Do not cross-connect the charging adapter outputs. Adapter damage may occur!
- Protect the adapter from high temperatures and mechanical damage.
- Use the adapter only in a dry environment.
- Protect it from water, do not use with wet hands, there is a risk of electric shock!
- Do not cover the adapter and allow access to air for sufficient cooling.
- The adapter may become hot during use, it is normal.
- I f the adapter is damaged, disconnect it IMMEDIATELY and do not use it again!
- Do not disassemble, modify, or attempt to repair the adapter.
- I f you do not use the adapter, unplug it.
- The adapter is for indoor use only and the mains voltage is 100 – 240V ~.
- Do not leave the adapter unattended.
QC USB OUTPUT
-
USB type A – Female port supports
SMART 5V/4.4A charging,
Quick Charge 3.0: 3.6-6.5V/3A, 6.5-9V/2A
9-12V/1.5A charging. -
Standard charging for all devices using 5V
and Apple iPhone 5, 6, SE, 7 charging. -
Smart 5V/4.4A charging, Qualcomm Quick Charge 1.0,
USB Battery Charging 1.2, Apple 2.4A (iPad) charging. -
QC – fast charging devices supporting
Qualcomm Quick Charge 2.0 and Quick Charge 3.0. -
AFC – fast charging devices supporting Samsung Adaptive Fast Charging.
-
FCP – fast charging devices supporting Huawei Fast Charge Protocol.
INPUT
- AC 100-240V / 50-60 Hz
- 2-pin EURO plug
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmed in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.