ACCORD LIGHTING 5104 Ceiling Lamp Instruction Manual

June 3, 2024
ACCORD LIGHTING

ACCORD-LIGHTING-LOGO

ACCORD LIGHTING 5104 Ceiling Lamp

ACCORD-LIGHTING-5104-Ceiling -Lamp-PRODUCT

WARNING!
Be sure electrical power is OFF before and during installation or maintenance. The luminaire must be installed by a qualified electrician, in accordance with all applicable local codes. Ensure that the rated luminaire voltage requirements are compatible with the available mains supply in which it will be installed. All LEDS are included in your lamp. Never touch the LED surface with your bear hands as this may reduce the life of your LED. |Do not alter, relocate or remove any electrical component.

  • Line: Balance
  • Family: Ceiling Lamp
  • Description: Accord Balance Ceiling Lamp 5104
  • Material: Natural Wood Veneer, MDF and Carbon Steel.
  • Weight:

ASSEMBLING THE FIXTURE

Read carefully all the Assembly Instructions below, before starting the installation process.

ACCORD-LIGHTING-5104-Ceiling -Lamp-FIG1 ACCORD-
LIGHTING-5104-Ceiling -Lamp-FIG2

  1. Notice that the fixture is packed pre-assembled. Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface in order to assemble them, if needed use the protecting package to soften the surface and protect the parts from getting scratched or harmed.
  2. Once the protecting packages are removed, rotate the metallic arms of the fixture until it is aligned according with image (2) according to the desired position.
  3. After all the metallic arms are positioned in the desired alignment, one of a time, hold the stem in place and screw the nut located on top of the canopy until it is locked. Take care to not harm the energy cables and connectors in this process.
  4. On each metallic arm, join the dome to the metallic support through it’s upper opening, aligning the holes and fastening theprovided screws (S01) to lock the dome in place.
  5. Finish the fastening of the cross tip screws located on the swivel joints base, in order to keep it tight.
  6. Before starting the mounting of the fixture on the ceiling, holding the canopy in place, rotate the metallic arms one last time to make sure its completely tight and locked on it’s position.
  7. Start removing the locking screws (S03) from the canopy.
  8. Low the outter canopy from the structural base in order to have some space to work.
  9. Place the fixture in the desired position and make the marks on the ceiling, then drill the holes and insert the plastic bushings.
  10. Pass the energy cable through the junction box cover, rise the fixture close to the junction box and make the electrical connections following all the applicable local codes. Insert the escess energy cable inside the junction box.
  11. Fasten the provided screws (S11) on the junction box cover in order to assemble it to the junction box.
  12. Fasten the provided screws (S07) on the structural base, attaching the fixture to the ceiling. Take care to not press or harm the energy cable.
  13. Rise the outter canopy and lock it at the structural base with the locking screws (S03).

Turn on energy power, the luminaire is ready for use.

USER GUIDE

The wooden dome which houses the light source is articulated. Hold the dome and rotate it in order to direct the light to the desired spot. Be careful to not exceed the swivel joint’s articulation limit so it doesn’t break. It is recommended to use a mini LED bulb (E26 – A15) in this fixture. Due to the dome size a regular bulb size would come out of the dome causing excessive light glare.

ATTENTION!
FAILURE T0 COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF PRODUCT WARRANTY. Its recommended reading these instructions completely and carefully before proceeding.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including electrical components and finishes, for a period of three years, under normal use, from the date of purchase. For warranty service, please Contact your local dealer for further instructions. Proof of the date of purchase will be required for validation of warranty service. The responsibility of the manufacturer regarding the product warranty is related to the Correct observation of the instructions contained in this manual. The manufacturer is not responsible for any damage to the product caused by accidents, alterations of any kind, improper usage, or improper installation. See the website for additional warranty details.

ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the manufacturer it additional information Is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions, and model details.

WARNING!
Be sure electrical power is OFF before and during installation or maintenance. The luminaire must be installed by a qualified electrician, in accordance with all applicable local codes. Ensure that the rated luminaire voltage requirements are compatible with the available mains supply in which it will be installed. All LEDs are included in your lamp. Never touch the LED surface with your bear hands as this may reduce the life of your LED. Do not alter, relocate or remove any electrical component.

  • Line: Balance
  • Family: Ceiling Lamp
  • Description: Accord Balance Ceiling Lamp 5104
  • Material: Natural Wood Veneer, MDF and Carbon Steel.
  • Weight:

Once the overall structure of the fixture is assembled, the ceiling must me prepared to mount the fixture.

accordlighting.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ACCORD LIGHTING User Manuals

Related Manuals