ACCORD LIGHTING 7063 Table Lamp Instruction Manual
- October 30, 2023
- ACCORD LIGHTING
Table of Contents
ACCORD LIGHTING 7063 Table Lamp Instruction Manual
WARNING!
Be sure electrical power is OFF before and during instalaton or maintenance.
The luminaire mustbe intalled by a qualified lectician,in accordance wih al
applicable this may reduce theffe of your LED. local codes.
Ensure that th rated luminaire voliage equiremens are compatible wih th
available ! mains supply in which i will b intaled
Al LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce theffe of your LED.
Do notale,relocae or ramove any elecrical component
Line: Balance
Family: Table Lamp
Description: Balance Accord Table Lamp 7063
Material: Natural Wood Veneer, MDF and Carbon Steel.
Weight: 1,75Kq / 3,85lbs
ASSEMBLING THE FIXTURE
Read carefully all the Assembly Instructions below, before starting the installation process.
- Notice that the fixture is packed separately and dismantled in two separate parts. Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface in order to connect them, if needed use the protecting package to soften the surface and protect the parts from getting scratched or harmed.
- Once the protecting packages are removed, connect both parts of the fixture: fit the dome to the metallic support through it’s superior opening, alligning the holes and fastening the provided screws (S01) to lock the dome in place.
- Finish the fastening of the Philips screws located on the swivel joints base, in order to keep it tight.
Once the dome is assembled and tight, the luminaire is ready
USER GUIDE
Plug the fixture in a propper outlet, using the hand switch to turn the fixture ON/OFF.
The wooden dome which houses the light source is articulated. Hold the dome and rotate it in order to direct the light to the desired spot. Be careful to not exceed the swivel joint’s articulation limit so it doesn’t break.
It is recommended to use a mini LED bulb (E26 – A15) in this fixture. Due to the dome size a regular bulb size would come out of the dome causing excessive light glare.
PROVIDED SCREWS
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY. 1 recommended 0 ead these instuctons compleely and carefully
before proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AACCORD Lighting guarantees coverage against manufacturing defects including electrical components and finishes, for a period of three years, under normal use, from the date of purchase. For warranty service, please contact your local dealer for further instructions. Proof of date of purchase will be required for validation of warranty service.
‘The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual
‘The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation,
See the website for additional warranty details.
‘ACCORD Lighting reserves the right to change te dimensions and specifications contained inthis manual without pror nofce,in acordance wih ts poliy of continuous product improvement. Please, contac the manufacturer if additonal information i necessary. The llustrations in this manual ar for guidance anly and may vary in scale, dimensions and model detils.