ACCORD LIGHTING E-26 Pendant Light Instruction Manual

June 3, 2024
ACCORD LIGHTING

ACCORD LIGHTING logo 3047 E-26
ASSEMBLY INSTRUCTIONS

USA & CANADA

E-26 Pendant Light

WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.ACCORD LIGHTING E
26 Pendant Light

Line: CUBIC
Family: FLOOR LAMP
Description:  CUBIC ACCORD FLOOR LAMP 3047
Material: Natural Wood Veneer, MDF and Frosted Glass Globe
Weight: ASSEMBLING THE FIXTURE
Read carefully all the Assembly Instructions below, before starting the installation process.
Turn OFF the power before start the installation.

  1. Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface  in order to connect them, if needed use the protecting package to soften the surface and protect the parts from getting scratched or harmed.
  2. Install a mini-LED bulb (A15) on the E-26 socket and then make the assembling of the glass globe on the aluminum base, holding carefully the two metallic tabs and  inserting the globe one side at a time below the tabs. Release carefully the tabs, one at a time, so that they keep the globe fixed in place.

The luminaire is ready to use.
Plug the fixture in a proper outlet, using the floor switch to turn the fixture ON/OFF.

ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF PRODUCT WARRANTY.
Its recommended to read these instructions completely and carefully before proceeding.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including electrical components and finishes, for a period of three years, under normal use, from the  date of purchase. For warranty service, please contact your local dealer for further instructions. Proof of date of purchase will be required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is related to the correct observation of the instructions contained in this manual.
The manufacturer is not responsible for any damage to the product caused by accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the manufacturer if additional information is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions and model details.

accordlighting.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ACCORD LIGHTING User Manuals

Related Manuals