ACCORD LIGHTING 4068 G-9 Wall Lamp Accord Clean Instruction Manual
- June 8, 2024
- ACCORD LIGHTING
Table of Contents
4068 G-9
ASSEMBLY INSTRUCTIONS
USA & CANADA
4068 G-9 Wall Lamp Accord Clean
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Line: Clean
Family: Wall
Description: Clean Accord Wall Lamp 4068
Material: Natural Wood Veneer, MDF and Acrylic
Weight:
INSTALLING THE FIXTURE ON WALL
Turn OFF the power before start the installation.
MAKING ELECTRICAL CONNECTIONS
- Pass the power supply cable through the off-center hole on the lamp holder base and crossbar.
- Connect the electrical supply wires to the junction box in accordance to all aplicable local codes, as shown in the diagram.
MOUNTING ON THE FIXTURE
3. Attach the crossbar to the wall using the supplied screws.
4. After electrical connections are made, place excess wire inside of the
junction box.
5. Fix the lamp holder base to the wall using the supplied screw(s).
6. Once the base is fixed, install the G-9 base bulb(s) (not included) into
the G-9 lamp holder(s) within the fixture.
7. Bring the luminaire to the wall and leave it on top of the installed base
until everything rests thight.
Turn ON electrical power.
Your luminaire is now ready for use.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY.
Its recommended to read these instructions completely and carefully before
proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual. The manufacturer is not responsible for any damage to the product
caused by accidents, alterations of any kind, improper usage or improper
installation. See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the manufacturer if additional information is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions and model details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>