ACCORD 4188 E-26 Cubic Light Instruction Manual
- June 3, 2024
- ACCORD
Table of Contents
ACCORD 4188 E-26 Cubic Light
ASSEMBLY INSTRUCTIONS
USA & CANADA
| WARNING! Be sure electrical power is OFF before and during installation
or maintenance. The luminaire must be installed by a qualified electrician, in
accordance with all applicable local codes.| Ensure that the rated luminaire
voltage requirements are compatible with the available mains supply in which
it will be installed. All LEDS are included in your lamp. Never touch the LED
surface with your bear hands as this may reduce the life of your LED. Do not
alter, relocate or remove any electrical component
---|---|---
Line: CUBIC
Family: WALL LAMP
Description: CUBIC ACCORD WALL LAMP 4188
Material: Natural Wood Veneer, MDF and Frosted glass Globe
Weight:
ASSEMBLING THE FIXTURE
Read carefully all the Assembly Instructions below, before starting the
installation process.
Turn OFF the power before start the installation.
-
Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface in order to connect them, if needed use the protecting package to soften the surface and protect the parts from getting scratched or harmed.
-
Install a mini-LED bulb (A15) on the E-26 socket and then make the assembling of the glass globe on the aluminum base, holding carefully the two metallic tabs and inserting the globe one side at a time below the tabs. Release carefully the tabs, one at a time, so that they keep the globe fixed in place.
-
With the overall structure of the fixture pre-assembled, pass the energy cable through the crossbar (C) and junction box cover (B), getting the fixture close to the junction box and making all the electrical connections following all the applicable local codes. Insert the excess energy cable inside the junction box.
-
Fasten the provided screws (S02) on the junction box cover to close the junction box.
-
Fasten the provided screws (S01) on the structural base (A) to fix it to the wall.
-
Fit the luminaire to the structural base by moving the piece from top to bottom, against the wall.
Once the luminaire is fixed on the structural base, turn ON energy power.
The luminaire is ready to use
| ATENTION! FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS
AND LOSS OF PRODUCT WARRANTY. Its recommended to read these instructions
completely and carefully before proceeding
---|---
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service| The responsability of the
manufacturer regarding the product warranty is related to the correct
observation of the instructions contained in this manual. The manufacturer is
not responsible for any damage to the product caused by accidents, alterations
of any kind, improper usage or improper installation. See the website for
additional warranty details.
---|---
ACCORD Lighting reserves the right to change the dimensions and specifications contained in this manual without prior notice, in accordance with its policy of continuous product improvement. Please, contact the manufacturer if additional information is necessary. The illustrations in this manual are for guidance only and may vary in scale, dimensions and model details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>