ACCORD LIGHTING 5105 Balance Ceiling Lamp Instruction Manual
- October 30, 2023
- ACCORD LIGHTING
Table of Contents
5105 Balance Ceiling Lamp
Instruction Manual
5105 Balance Ceiling Lamp
ASSEMBLY INSTRUCTIONS
USA & CANADA
WARNING! Be sure electrical power is OFF before and during installation or
maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEGS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Line: Balance
Family: Ceiling Lamp
Description: Accord Balance Ceiling Lamp 5105
Material: Natural Wood Veneer, MDF and Carbon Steel.
Weight:
ASSEMBLING THE FIXTURE
Read carefully all the Assembly Instructions Below, before starting the installation process.
-
Notice that the fixture is packed pre-assembled. Remove the protecting package from the pieces taking care to not harm any parts with cutting surfaces or objects. Lay the parts of the fixture on some horizontal surface in order to assemble them, if needed use the protecting package to soften the surface and protect the parts from getting scratched or harmed.
-
Once the protecting packages are removed, rotate the metallic arms of the fixture until it is alligned according with the image (2) or according to the desired position.
-
After all the metallic arms are positioned in the desired allignment, one of a time, hold the stem in place and screw the nut located on top of the canopy until it is locked. Take care to not harm the energy cables and connectors in this process.
-
On each metallic arm, join the dome to the metallic support through it’s upper opening, alligning the holes and fastening the provided screws (S01) to lock the dome in place.
-
Finish the fastening of the crosstip screws located on the swivel joints base, in order to keep it tight.
-
Before starting the mounting of the fixture on the ceiling, holding the canopy in place, rotate the metallic arms one last time to make sure its completely tight and locked on it’s position.
Once the overall structure of the fixture is assembled, the ceiling must me prepared to mount the fixture.
-
Start removing the locking screws (S03) from the canopy. Low the outter canopy from the structural base in order to have some space to work.
-
Place the fixture in the desired position and make the marks on the ceiling, then drill the holes and insert the plastic bushings.
-
Pass the energy cable through the junction box cover, rise the fixture close to the junction box and make the electrical connections following all the applicable local codes. Insert the escess energy cable inside the junction box.
-
Fasten the provided screws (S11) on the junction box cover in order to assemble it to the junction box.
-
Fasten the provided screws (S07) on the structural base, attaching the fixture to the ceiling. Take care to not press or harm the energy cable.
-
Rise the outter canopy and lock it at the structural base with the locking screws (S03).
-
Turn on energy power, the luminaire is ready for use.
USER GUIDE
The wooden dome which houses the light source is articulated. Hold the dome
and rotate it in order to direct the light to the desired spot. Be careful to
not exceed the swivel joint’s articulation limit so it doesn’t break.
It is recommended to use a mini LED bulb (E26 – A15) in this fixture. Due to
the dome size a regular bulb size would come out of the dome causing excessive
light glare.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY
CAUSE ACCIDENTS AND LOSS OF PRODUCT WARRANTY. Its recommended to read these
instructions completely and carefully before proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual. The manufacturer is not responsible for any damage to the product
caused by accidents, alterations of any kind, improper usage or improper
installation. See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>