ACCORD 495 LED-UL Ceiling Lamp Instruction Manual
- June 2, 2024
- ACCORD
Table of Contents
495 LED-UL Ceiling Lamp
Instruction Manual
ASSEMBLY INSTRUCTIONS
USA & CANADA
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Line: Miter joint
Family: ceiling mounted
Description: Miter joint ceiling mounted 495
Material: Natural Wood Veneer MDF and Acrylic
Weight:
MAKING ELECTRICAL CONNECTIONS
-
Align and mark on ceiling the positions of holes using base as drilling template. Make the holes with a 8mm drill and install the provided plastic bushing.
-
Insert electrical cable through the crossbar.
-
Connect the electrical supply wires to the junction box in accordance to all aplicable local codes, as shown in the diagram.
-
After electrical connections are made, place excess wire inside of the junction box.
-
Attach the metal canopy to the junction box using the supplied screws.
MOUNTING ON THE FIXTURE -
Attach the support base to the ceiling using the supplied screws into the installed plastic wall plugs.
-
Bring the Luminaire to the ceiling and secure it by screwing the side of the it’s base. Turn ON electrical power. Your luminaire is now ready for use.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY. ! Its recommended to read these instructions completely and
carefully before proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual. The manufacturer is not responsible for any damage to the product
caused by accidents, alterations of any kind, improper usage or improper
installation. See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>