NINGBO 0116 Wireless Speakers User Manual
- June 8, 2024
- Ningbo
Table of Contents
USER MANUAL
What’s in the box?
- Smart watch wireless charger*1
- User manual*1
Overview
- Wireless charging area
- Type- C charging cable
Specifications:
- Item :26512
- Output power: Max.2.5W
- Input: DC 5V / 1A
Operation Instructions
- Connect the Wireless Charger to a Type-C port of qualified adapter with more than 1A output
- To charge a smart watch, place it directly on top of the charging area. The smart watch will indicate it is charging.
Attention:
- Please avoid exposure, rain, water droplets, avoid prolonged exposure to high temperature, high humidity environment.
- Please use the qualified adapter which meets the requirements.
- Do not drop or bump and applied heavy pressure to avoid damage to the product.
- Keep credit cards, pacemakers and other sensitive electronic device away from the wireless charger.
- Do not use the charger outside the safe operating temperature range of 32°F to 113°F (0°C to 45°C)
- Do not place anything between the IWATCH being charged and the charging area.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance
20cm between the radiator and your body.
Use of the Made for Apple badge means that an accessory has been designed to
connect specifically to the Apple product(s) identified in the badge, and has
been certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with an
Apple product may affect wireless performance.
iPad, iPad Air, iPad Pro, iPhone,Apple Watch and Lightning are trademarks of
Apple Inc., registered in the U.S. and other countries.
FCC ID:2ABHA0116
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>