cudy GS1028PS2 24-Port Gigabit PoE+ Switch Installation Guide
- June 8, 2024
- cudy
Table of Contents
GS1028PS2 24-Port Gigabit PoE+ Switch
Installation Guide
Hardware Connection
Specifications
Model | GS1028PS2 |
---|---|
Network Protocol | IEEE802.3 / IEEE802.3u / /IEEE802.3x |
IEEE802.3ab / IEEE802.3z / IEEE802.3af/at
PoE Standard| IEEE802.3af (15.4w) and IEEE802.3at (30W)
POE port output| DC48-55V
Power Pin| Power over spare pairs 1/2(+) , 3/6 (-)
Network Media| 10BASE-T: Cat3、4、5 or higher UTP(≤100 meter)
100BASE-TX: Cat5 or UTP (≤100 meter)
1000BASE-TX: Cat5 or UTP (≤100 meter)
Bandwidth| 8K
MAC| 4M
Packet Buffer Memory| 52Gbps
Packet Forwarding Rate| 38.7Mpps
Optical| Power input: AC100-240V 50/60Hz
Output: 52V5.76A
Power Budget: 300W
Power Supply| Single-Mode Fiber: 850nm, 1310nm
Transmission Distance: 550m/2Km
Single-Mode Fiber: 1310nm, 1550nm
Transmission Distance: 20/40/60/80/100/120km
MTBF| 100,000 hours
Product Dimension| 410x185x44.5mm
DIP Explanation
VLAN| Port Isolation| Downlink designated ports are isolated from each other,
only transmit data with the uplink port.
---|---|---
Default| Standard Switch| All ports communicate freely
Extend| Link Extension| The specified port speed drops to 10Mbps, max PoE
transmission distance is 250 meters.
LED and Interface Explanation
PWR | Power supply indicator Red | ON | Powered |
---|---|---|---|
OFF | No power | ||
1-26 Port | RJ-45 LINK indicator Green | ON | 1000M Connect |
OFF | 100M or Disconnect | ||
1-26 Port | RJ-45 ACT indicator Green | ON | Connecting |
OFF | Disconnect | ||
Flashing | Data Transmit |
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of
conformity may be found at http://www.cudy.com/
Email: support@cudy.com
Email: support@cudy.com
Website: www.cudy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>