SIGMA BC 12.0 WR Cycling Computer Instruction Manual
- June 8, 2024
- SIGMA
Table of Contents
SIGMA BC 12.0 WR Cycling Computer
INSTALLATION
CONTENTS
FIRST START
Battery already installed
INSTALLATION MOUNT
INSTALLATION WIRED SPEED SENSOR
WIRED
INSTALLATION WIRELESS SPEED TRANSMITTER
Emission frequency: 112 kHz, Max power < 11.37 dBm
WIRELESS
TECHNICAL DATA
Computer WIRED:
- Battery type: CR 2450, 3V
Battery life: 3 to 4 years (When used for 1 hour per day)
Computer WIRELESS:
- Battery type: CR 2450, 3V
- Battery life: 2 years (When used for 1 hour per day)
Transmitter:
- Battery type: CR 2032, 3V
- Battery life: 1.5 years (When used for 1 hour per day)
LEGAL STATEMENTS
FEDERAL COMMUNICATION COMMISSION NTERFERENCE STATEMENT
Caution: If any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could
void the user’s authority to operate the equipment.
The RF Exposure Compliance distance is 5 millimeters.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID STS-S-3: M5LSPD3STS FCC
ID STS-C-3: M5LCAD3STS
INDUSTRY CANADA STATEMENT
This device complies with Innovation, Science and Economic Development Canada
licensee-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 5
millimeters between the radiator and your body.
UKCA STATEMENT
Wireless Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in
our facility and found compliance with the requirement limits of applicable
standards, in accordance with the Radio Equipment Regulations 2017 and the
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The test record, data evaluation and
Equipment Under Test (EUT) configurations represented herein are true and
accurate under the standards herein specified.
Wired Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in
our facility and found compliance with the requirement limits of applicable
standards, in accordance with the Electromagnetic Compatibility Regulations
2016 and the Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012. The test record, data
evaluation and Equipment Under Test (EUT) configurations represented herein
are true and accurate under the standards herein specified.
EU-DECLARATION OF CONFORMITY
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15,
D-67433 Neustadt/Weinstraße declare under our responsibility that the product
BC 12.0 WR are compliant with the essential requirements of the EMC Directive
2014/30/EU and the RoHS Directive 2011/65/EU. The declaration of conformity
can be found at: ce.sigmasport.com/bc120wr
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15,
D-67433 Neustadt/Weinstraße declare under our responsibility that the product
BC 12.0 WL and the transmitters STS-S-3 and STS-C-3 are compliant with the
essential requirements and other relevant requirements of the RED Directive
2014/53/EU and the RoHS Directive 2011/65/EU. The declaration of conformity
can be found at: ce.sigmasport.com/bc120wl
CE INFORMATION
You can find the CE declaration at:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt/Weinstraße, Germany
kundenservice@sigmasport.com
BUTTON OVERVIEW
FUNCTIONS / SETTINGS
MENU BASIC BIKE FUNCTIONS
DISPLAY OVERVIEW
SETTINGS MENU
CHOOSE YOUR SPECIFIC WHEEL SIZE
EXAMPLE OF SETTING PROCEDURE:
-
Open menu: Press and hold A button until the menu opens
-
Toggle to SETTINGS page with the B or the button
-
Open the SETTINGS menu by pressing the A button
-
Toggle in the SETTINGS menu to the DEVICE settings with theory the button
-
Open settings by pressing the A button
-
Toggle to WHEELSIZE 1 setting by pressing the B or the C button
-
Press A button to start adjustment of the WHEELSIZE 1
-
Change value by pressing the B or the button
-
Confirm adjusted value by pressing A button
Note: Do steps No. 8 and No. 9 until all numbers are adjusted -
Go back to former menu level: Toggle to back page by pressing the B or the C button Confirm with the A button
-
Close menu: Press and hold the A button (3 sec.)
BATTERY CHANGE
BC 12.0 WR/WL
SPEED TRANSMITTER (BC 12.0 WL)
CADENCE TRANSMITTER (BC 12.0 WL)
Documents / Resources
|
SIGMA BC 12.0 WR Cycling
Computer
[pdf] Instruction Manual
BC 12.0 WR, BC 12.0 WL, BC 12.0 WR Cycling Computer, Cycling Computer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>