SIGMA Rox 2.0 GPS Bike Computer User Manual
- June 3, 2024
- SIGMA
Table of Contents
SIGMA Rox 2.0 GPS Bike Computer
REMARKS
This manual is a quick guide. You can access the detailed instructions by following this link:
CONTENTS
TOP MOUNT SET
-
Item no. 081050
-
Item no. 080466
-
Item no. 090164
-
Item no. 090165
-
Item no. 190007
-
Item no. 090709
TOP MOUNT SET
-
Item no. 081050
-
Item no. 080466
-
Item no. 010500
-
Item no. 090142as
-
Item no. 090709
INSTALLATION
Available in set or sold separately!
BUTTON FUNCTIONS
START/STOP/MENU Button
- Start training
- Stop training
- Confirm input
- One menu level down
- Switch on the device (press for 3s)
Press and hold button:
– Open and close menu
PLUS Button
- One page forward
- Increase value
Press and hold button:
– Save and reset training values
FIRST START
Press START Button for 5s to Wake-Up.
Choose YES to pair a Smartphone, choose NO to manually set the device
Download SIGMA RIDE App and follow App instructions to configure your device.
OR set device and user settings manually
Enjoy your device and start your first ride!
**TIP
SIGMA RIDE App
**
---|---
The app offers you many functions for setting up and customising the ROX 2.0.
For more information on the app functions, see the „SIGMA RIDE app“ page.
TRAINING
Press START button for 3s to start the device.
Don‘t move and search for clear sky location for fast GPS fix.
Wait for „GPS OK“. Press START button to start the training session
Press START button to stop the training session.
Hold „+“ button to reset training values and save your training
Sync with Smartphone for full data analysis and sharing.
MENU OVERVIEW
MAIN MENU
Hold START button, when training is NOT started
You have access to the main menu with all the functions of the ROX 2.0
SHORT CUT MENU
Hold START button, when training is active or in auto pause.
You can edit the most important settings during training.
SETTINGS
Choose Settings in main menu to set the device
You can edit Device settings and Totals
Choose a setting you want to edit and press START button to set
Press “+” button to increase a value or to toggle through options.
Press START button to confirm the settings.
Use the App to set your training views.
Use the App or SIGMA DATA CENTER to update your firmware.
E-BIKE CONNECTION
Choose Main Menu > Connection > E-Bike to pair a new E-Bike or manage
paired Bike.
Make sure that E-Bike is switched on!
Press START button to pair E-Bike.
SIGMA RIDE APP
Set Device and Training Views
Firmware Update
Analyze your training
Share your data and many more…
TIP : Check for Firmware Updates regularly. To access the changelog, follow this link:
CHARGING AND DATA TRANSFER
Open USB Cove.
Insert USB-C cable. Check that the cable and port are dry!
Charge with 5V max. 1000mA
Connect to PC for data transfer.
IMPORTANT : Please ensure that the USB cover is always closed before starting a training session.
TECHNICAL INFORMATION
ROX 2.0|
---|---
Battery type| Rechargeable 350 mAh, 3.7 V Battery
Operation temperature| 0 °C to 60 °C
Operation frequency| ANT+ 2.4 GHz @ 1 dBm nominal Bluetooth 2.4 GHz @ 1 dBm
nominal GPS 1575.42 MHz (receiver only) GLONASS 1602 MHz (receiver only
Transmission power| <4 dBm
Water and Dust rating| IPX7
You can find the CE declaration at: ce.sigmasport.com/rox20
SIGMA-ELEKTRO
Dr.-Julius-Leber-Straße 15
D-67433 Neustadt/Weinstraße
kundenservice@sigmasport.com
