morphy richards MRICE15SS Ice Maker Instruction Manual

June 6, 2024
morphy richards

morphy richards logo Ice Maker
INSTRUCTION MANUAL

morphy richards MRICE15SS Ice Maker Model: MRICE15SS

Read these instructions carefully before using this appliance for the first time.
STORE THESE INSTRUCTIONS CAREFULLY
For product hints and tips plus more join us at
www.morphyrichards.com.au
facebook.com/MorphyRichardsAUS
instagram.com/morphyrichardsau

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, injury to persons, or damage to property, follow basic precautions including the following:

  • WARNING: Misuse of the appliance could cause personal injury as it contains flammable materials.
  • WARNING : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
  • WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
  • WARNING: Do not damage the refrigerant circuit.
  • WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
  • WARNING: When positioning the appliance, ensure the main cord is not trapped or damaged.
  • WARNING: Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
  • WARNING: Fill with potable water only.
  • If the main cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person in order to avoid a hazard.
  • Do not remove any safety, warning, or product information labels from your ice maker.
  • Keep the appliance and its cord out of the reach of children.
  • This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with this appliance.
  • In the absence of supervision, the cleaning and maintenance work should not be done by a child.
  • Do not leave the appliance unattended while in use.
  • Use of accessories not recommended or sold by the original manufacturer may cause risks of fire, electric shock or personal injury.
  • This appliance must be used in accordance with the instructions and must not be used for other purposes.
  • This appliance is intended to be used in household and similar applications such as:
    – staff kitchen areas in shops, offices, and other working environments;
    – farmhouses and by clients in hotels, motels, and other residential type environments;
    – bed and breakfast type environments;
    – catering and similar non-retail applications.

Location

  • Always locate your appliance away from the edge of a worktop and ensure that the appliance is used on a firm, flat surface.
  • For indoor use only. Do not use the appliance outdoors, or near water.
  • Do not place the appliance on or near heat sources such as gas or electric stoves, ovens, or burners.

Mains Cord

  • The main cord should reach from the socket to the base unit without straining the connections.
  • Do not let the main cord hang over the edge of a worktop where a child could reach it.
  • Do not let the cord run across an open space e.g. between a low socket and table.
  • Do not let the cord run across a cooker or toaster or another hot area that might damage the cord.

Other Safety Considerations

  • WARNING: To protect against fire, electric shock, and personal injury, do not immerse the cord, plugs, or appliances in water or other liquid.
  • WARNING: Extreme caution must be used when moving the appliance when containing hot food, water, or other hot liquids.
  • Unplug from the socket when not in use, before putting on or taking off attachments, and before cleaning to avoid damaging the refrigerating system. Pull-on the plug, not the cord.
  • Do not operate any appliance with a damaged cord or plug, or after an appliance has malfunctioned, or has been dropped or damaged in any way.
  • Keep the appliance and the cord away from heat, direct sunlight, moisture, and sharp edges.
  • To disconnect, turn any control to “OFF”, wait five minutes and then remove the plug from the wall outlet.
  • Do not plug or unplug the product with wet hands.
  • Do not attempt to disassemble, repair, modify, or replace any part of your product.
  • Check that the voltage on the appliance rating plate corresponds with your house electricity supply which must be A.C.
  • Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is necessary to use an extension cord:
  1. Use only an extension cord with a grounding plug.
  2. The marked rating of an extension cord must be equal to or greater than the rating of this appliance.
  • WARNING: This appliance must be earthed. Plug the ice maker into an exclusive grounded power outlet. No other appliance should be plugged into the same outlet.

Product Use

  • Do not use water that is microbiologically unsafe or of unknown quality.
  • Do not clean your ice maker with any flammable fluids. The fumes may cause illness, fire hazards,s or explosions.
  • Do not overturn the ice maker. If the ice maker is overturned accidentally, stand it steadily for 2 hours before operating again.
  • If the ice maker is brought in from storage in colder seasons, do not use it for a few hours, allowing the unit to warm up to room temperature before operating.
  • Never put flammable, explosive, and corrosive articles into the ice maker.
  • Never use the ice maker when there is flammable gas leakage.
  • Never store or use gas and other flammable articles near the ice maker to avoid any fire.
  • Do not touch the evaporator when using the ice maker or making ice to avoid potential frostbite.
  • Please dispose of the ice maker according to local regulations as it uses flammable blowing gas and refrigerant.

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

INTRODUCTION

Thank you for purchasing a Morphy Richards Ice Maker. Produce bullet ice at a moment’s notice for a quick chilled drink or up to 15kg in a 24hr period.
Please take some time to familiarise yourself with your new Ice Maker.
This manual explains what you need to do before first use as well as explaining some hints and tips to keep your ice maker operating correctly.

SPECIFICATIONS

Model: MRICE15SS
Colour: Stainless Steel
Rated Voltage: 220-240V~50Hz
Rated Power: 145W
Water Tank Capacity: 2.8L
Ice Cubes Per Cycle: 9
Ice Bin Storage Capacity: 1.8kg
Refrigerant/Refrigerant Amount: R600a/25g
Foaming Agent: C5H10
Product Dimensions (L x W x H): 400 x 246 x 430mm
Net Weight: 11kg

PRODUCT OVERVIEW

morphy richards MRICE15SS Ice Maker - OVERVIEW1| morphy richards MRICE15SS Ice Maker - OVERVIEW2
---|---
morphy richards MRICE15SS Ice Maker - OVERVIEW3| morphy richards MRICE15SS Ice Maker - OVERVIEW4

CONTROL PANEL

morphy richards MRICE15SS Ice Maker - PANEL

a. Ice Size Selector – Large
b Ice Size Selector – Small
c Clean
d Start/Stop Button| e Ice Size Selector
f Ice Making In Progress
g Out Of Water
h Ice Basket Is Full
---|---

BEFORE FIRST USE

Before first use, please take a few minutes to read this instruction book and find a place to keep it handy for future reference. Please pay particular attention to the safety instructions.

  1. Unpack the appliance, then check and make sure that all the accessories including ice basket and ice scoop, etc. are included.

  2. Please ensure the ice maker is level and stable to avoid malfunction.

  3. The incline angle of the ice maker cabinet should not exceed 45°during transportation or use. Do not turn the ice maker upside down. Doing so could cause the compressor or refrigerating system to operate incorrectly.
    Please allow time for the fluids in the compressor to settle after the ice maker is moved or transported. Before using the ice maker for the first time, please wait for 2 hours after the unit has been leveled and positioned in the proper place.

  4. The appliance must be placed on a dry and level surface with sufficient ventilation, far from heat sources such as ovens, heaters, and corrosive gases. Leave a 15cm clearance on all sides of the ice maker for proper ventilation.

  5. Do not fill the water reservoir with hot water, as this may damage the ice maker. It is recommended to fill the reservoir with room temperature water or a cooler.

USING YOUR ICE MAKER

  1. Ensure the drain tube plug at the bottom of the water reservoir is closed.

  2. Plug the ice maker into the wall outlet. The Ice Making In Progress indicator (f) will blink.
    NOTE: The ice maker should not be turned on for 30 minutes if it has been moved.

  3. Open the lid (refer to the diagram on page 7) and remove the ice basket.

  4. Do not fill above the MAX water level mark.

  5. Replace the ice basket and close the lid.

  6. Press the Ice Size Selector button (e) to select the ice size, (b) for small ice, and (a) for larger-sized ice.

  7. Press the Start/Stop button (d) and the Ice making In Progress indicator lights solidly.

  8. The ice-making cycle will last approximately 7-15 minutes, depending on the ambient and water temperature.

  9. The ice-making cycle starts with water being pumped into the ice tray situated below the evaporator. Over the next 7-15 minutes ice forms on the evaporator. Once this has been completed, the ice tray will tilt backward and the remaining water in the ice tray is drained back into the water reservoir.
    The ice cubes are then dropped from the evaporator and pushed forward into the ice basket by the ice export. The ice tray will automatically move back into position under the evaporator and start the next cycle.

  10. The Ice Basket Is Full indicator (h) will light up when the ice basket is full and the ice maker will stop automatically. Gently remove the ice from the ice basket with the ice scoop. After approximately 5 seconds, the ice maker will restart the ice-making function automatically.

  11. The Out Of Water indicator (g) will light up when the water reservoir is empty and the ice-making cycle will stop automatically. Remove the ice basket and add water to the water reservoir. Press the Start/Stop button (d) to restart the ice-making cycle.

  12. Once the desired amount of ice has been dispensed, press the Start/Stop button (d) and unplug the unit from the wall outlet.

  13. Open the lid and transfer the ice to a freezer.

NOTE: The ice will last in the ice maker for up to an 18 hour period, depending on the ambient temperature.

USING YOUR ICE MAKER

  1. Allow the ice maker to warm up to room temperature.
  2. It is recommended to replace the water weekly. Please empty the water reservoir, if the ice maker is not used for a long time.

CLEANING AND MAINTENANCE

To keep your ice tasting fresh and your ice maker looking in great condition, it is recommended to clean the ice maker at least once per week.

  1. Stop the ice-making cycle by pressing the Start/Stop button (d). Wait five minutes and unplug.

  2. If residual water is found in the ice tray, gently push the ice tray back so that all water drains into the water reservoir.

  3. Move the appliance forward 55-60mm away from the working table and remove the drain tube plug to drain excess water (see Fig.1, Fig.2, and Fig.3).

  4. Check and make sure the drain tube plug is closed securely. Fill the water reservoir with clean water, press the Ice Size Selector button (e) until the
    Appliance Needs Cleaning indicator (c) flashes. Press the Start/Stop button (d) and the pump will run water for approximately 6 minutes. The Ice maker will go into standby mode after running for 6 minutes. Finally, remove the drain tube plug and empty the water out.

  5. Remove the ice basket.

  6. Clean the ice maker interior with a soft cloth soaked with warm water and vinegar. Then rinse with clean water and drain any remaining water.

  7. Replace the drain tube plug securely in position. Wash the ice basket and ice scoop in warm soapy water. Rinse and dry.

  8. Clean the exterior of the ice maker with a soft damp cloth. Use a mild dishwashing detergent, if necessary.

NOTE: Do not use organic solvent, boiled water, detergent, strong acid, and strong alkali, etc. for cleaning.
Please empty the water reservoir and dry it for storage if the ice maker is not used for a long time.

morphy richards MRICE15SS Ice Maker - MAINTENANCE1| morphy richards MRICE15SS Ice Maker - MAINTENANCE2
---|---

TROUBLESHOOTING

Problem

| Possible Causes|

Solution

---|---|---
Indicator light on.

| Low water level or lack of water.
The water screen at the bottom of the water reservoir is blocked.
Pump malfunction.| Stop making ice. Refill water and press the Start/Stop button to restart the ice-making cycle.
Follow the cleaning steps on page 10.
Call the Customer Care team for advice.
Indicator light on.

| The ice basket is full and the infrared light is blocked by the ice.
Emitting tube & receiving tube not working.| Remove ice from the ice basket.
Wipe up the foreign objects on emitting tube & receiving tube and restart the ice maker.
Call the Customer Care team if the emitting tube & receiving tube still can not work after wiping up the foreign objects on them and restarting the ice maker.
Indicator blinks.

| The ice export is blocked.| Remove ice, if the ice export is blocked, otherwise, call Customer Service for assistance.
The ice maker stops working.

| The ice tray is not in the correct position.| Remove the ice in the ice tray and press the Start/Stop button to restart the appliance.
Call Customer Care team if the appliance still does not work after restart
The ice basket is full but the indicator does not illuminate.

| The “ice full” condition can not be detected as the infrared light module is interfered with by excessive sunlight.| Unplug the appliance and move it to a place that is not exposed to excessive sunlight. Then plug the appliance in and try it again.

TROUBLESHOOTING

Problem Possible Causes Solution
The ice gets stuck together. The water temperature in the reservoir is too
low. Fill the water reservoir with water ranging between 8°C and 25°C.
The ice-making cycle seems normal but no ice is produced. The ambient
temperature or water temperature is too high. Start the ice-making cycle in

an environment with an ambient temperature of less than 32°C and fill the water reservoir with some cold water.
Refrigerating system leaks| | Call Customer Care team
Refrigerating system blocks| | Call Customer Care team
Poor ice-making.| Poor heat dissipation.
The water temperature is too high.
The ambient temperature is too high.| Leave an 8-inch (20cm) clearance on all sides of the ice maker for proper ventilation.
Fill the water reservoir with water ranging between 8°C and 28°C.
Operate the ice maker in an environment with an ambient temperature between 10°C and 32`C.
The water pump does not work or produces noise.| 1. Water pump is damaged.
2. The appliance has not been cleaned for a long time. which has resulted in a substantial build-up in the water inlet of the water pump. so the water is not moving smoothly. There is ai 1., the water pipe. so there will be noise produced when the water is pumped.| 1. Call the Customer Care team
2. The appliance should be cleaned every one to weeks with a mild detergent.

MAINTENANCE

If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate.
Ask for advice by calling your local after-sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ).
WARNING! – It is hazardous for anyone other than an Authorised Service Person to service this appliance. In Queensland, the authorized Service Person MUST hold a Gas Work Authorization for hydrocarbon refrigerants, to carry out Servicing or repairs where the gas system is being opened or charged.
This appliance contains R600a refrigerant which is flammable.

WARRANTY

Please refer to the warranty card in the box for warranty information. For any
troubleshooting advice, please contact the relative Customer Care Centre below.
Glen Dimplex Australia Pty Ltd
8 Lakeview Drive, Scoresby 3179, Victoria
Australia
Ph: 1300 556 816
Glen Dimplex New Zealand Ltd
38 Harris Road, East Tamaki,
Auckland 2013 New Zealand
Ph: 0800 666 2824

NOTES


Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater, polluting the food chain and damaging health and wellbeing.

morphy richards logo Glen Dimplex Australia Pty Ltd
8 Lakeview Drive
Scoresby VIC 3179
Phone: 1300 556 816
Email: sales@glendimplex.com.au
Web: www.morphyrichards.com.au
© Glen Dimplex Australia. All rights reserved.
Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.
MRICE15SS-IB REV5

Documents / Resources

| morphy richards MRICE15SS Ice Maker [pdf] Instruction Manual
MRICE15SS, Ice Maker
---|---
| morphy richards MRICE15SS Ice Maker [pdf] Instruction Manual
MRICE15SS Ice Maker, MRICE15SS, Ice Maker, Maker

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

morphy richards User Manuals

Related Manuals