tp-link LS105G, LS108G 5, 8 Port Gigabit Desktop Switch Installation Guide
- July 13, 2024
- tp-link
Table of Contents
tp-link LS105G, LS108G 5, 8 Port Gigabit Desktop Switch
Product Usage Instructions
- On: Power on
- Off: Power off or power supply is abnormal
- Flashing: Power off or power supply is abnormal
- On: Running at 10/100/1000Mbps
- Off: No device is linked to the corresponding port
- Flashing: Transmitting/receiving data
- Connect the power adapter to the switch and plug it into a power source.
- Connect the switch to the router using an Ethernet cable.
- Connect your devices like PCs to the Ethernet ports on the LS108G switch.
LED Explanation
Power
- On: Power on
- Off: Power off or power supply is abnormal
- Flashing: Power off or power supply is abnormal
Link/Act
Note: For simplicity, we will take LS108G for example throughout this Guide.
Connection
FAQ
-
Q1: The Power LED is not lit.
The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows: -
A1: Make sure the power adapter is connected to the switch with the power source properly.
-
A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
-
A3: Make sure the power source is ON.
-
Q2: The Link/Act LED is not lit when a device is connected to the corresponding port.
It is recommended that you check the following items: -
A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
-
A2: Make sure the connected device is turned on and works normally.
-
A3: The cable must be less than 100 meters long (328 feet).
Specifications
General Specifications
Environmental and Physical Specifications
- Operating Temperature: 0˚C to 40˚C (32˚F to 104˚F)
- Storage Temperature: -40˚C to 70˚C (-40˚F to 158˚F)
- Operating Humidity: 10% to 90%RH non-condensing
- Storage Humidity: 5% to 90%RH non-condensing
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com/business to join TP- Link Community.
For technical support and other information, please visit https://www.tp- link.com/support/?type=smb, or simply scan the QR code.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- If you need service, please contact us.
- Do not use a damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- The adapter shall be installed near the equipment and shall be easily accessible.
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/.
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www .tp-link.com/support/ukca/.
References
- CE Regulatory Compliance | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
- Regulatory Compliance | TP-Link