SIGMA BUSTER 400 Front Light Headlight Instruction Manual
- June 1, 2024
- SIGMA
Table of Contents
SIGMA BUSTER 400 Front Light Headlight
Specifications
- Maximum Range: 120m*
- Battery Life: 25 hours
- Water Resistance: IPX4
- Charging Port: USB-C
Helmet Holder
The helmet holder provides optimal mounting for helmets with parallel
ventilation openings. It can be attached using a Velcro] strap for secure
placement.
Mounting Instructions
- Secure the helmet holder with a single Velcro strap for helmets with parallel ventilation openings.
- For helmets with differently positioned openings, use two Velcro straps to ensure stability.
BUSTER 400 Frontlight
The BUSTER 400 frontlight offers a powerful beam for improved
visibility while cycling. It can be adjusted easily by tightening the screw to
your desired position.
Silicone Holder
Position the BUSTER 400 frontlight to avoid blinding other road] users.
Securely attach the light to your bike, ensuring the beam is unobstructed.
Sigma Tip
Tighten the screw securely to allow easy adjustment of the lamp during your
ride without the need for tools.
MONTAGE-OPTIE
HELMHOUDER
FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any inter-ference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifi cations not expressly approved by the party responsible for compliance. Such modifi cations could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 5 millimeters between the radiator and your body.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifi cations not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
CE INFORMATION
EN SIGMA-ELEKTRO GmbH hereby declares that the BUSTER 400/HL comply with the
fundamental requirements and other relevant regulations of Directive
2014/30/EU and RoHS Directive 2011/65/EU. You can fi nd the CE declaration at:
ce.sigmasport.com/buster400,
ce.sigmasport.com/buster400hl
MONTAGE
VIDEO TUTORIALS
goto.sigmasport.com/busterhelmet/video
UKCA STATEMENT
We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in
our facility and found compliance with the requirement limits of applicable
standards, in accordance with the Electromagnetic Compatibility Regulations
2016 and the Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012. The test record, data
evaluation and Equipment Under Test (EUT) confi gurations represented herein
are true and accurate under the standards herein specifi ed.
ACTION CAMERA ADAPTER
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15 67433 Neustadt / Weinstraße Germany
kundenservice@sigmasport.com
VIDEO TUTORIALS
goto.sigmasport.com/buster400/service
5 MODI
LICHT-MODUS GEHEUGENFUNCTIE
VOORINGESTELDE LICHT-PROFIELEN
ACCU-INDICATOR
OPLAADINDICATOR
LAADPROCEDURE
189611-1_BUSTER-400+HL_Manual_90x55-SP1.indd 2189611-1_BUSTER-400+HL_Manual_90x55-SP1.indd 2
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>