GLEDOPTO GL-CP-I-002 Zigbee Controller Pro LED Strip Instruction Manual
- June 5, 2024
- GLEDOPTO
Table of Contents
ZIOBEE CONTROLLER PRO
User Instruction
Features:
Gateways/hubs Gledopto ZigBee products Directly work with: HUE, Amazon echo
plus, smart things, Osram lightify, Homee, etc Via Hue gateway, can work with
google home, all other Alexa devices
Apps work with Hue gateway:
Hue, huge party, hue Disco,iConnectHue, Hue Widget, Light DJ, etc
Work with Home Assistant:
https://www.reddit.com/r/Gledopto/com-
ments/ad9mbh/how_to_use_the_home_assistant_to_control_gledopto/
Work with Homekit :
(Not directly) https://www.reddit.com/r/Gledopto/com-ments/amp3v9/i wrote a
little guide on getting the gledopto/ Sync effect with screen bloom: Sync your
lights with movies, music, and games, Enjoy the lighting effect which
synchronizes with the plot of the picture immediately and experience the more
delicate atmosphere lighting effect. How to sync?
Gledopto HDMI SYNC Box Please follow this website:
http://www.screenbloom.com/
Sync Show Demo: https://youtu.be/zZjtJMy_774
Q &A or more info, please go to:
www.gledopto.com or email to
[email protected], or
https://www.reddit.com/r/Gledopto/ (Not official)
Thanks for buying our products.
In this manual we will explain the connection of wires and the connection with
a ZigBee Light Link Gateway. These devices works with many ZigBee Light Link
Gateways* like Philips Hue. Amaon Echo Plus or SmartThings.
Wire Connection:
- Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable cross-section must be between 0.33 and 2.08mm2(AWG22-14).
- Now push down the terminal with a screwdriver and put in the cable, see picture P2.
- Take the screwdriver away and the cable is connected with the terminal.
On picture P3-P7 you can see examples for the connection of different LED
controllers:
– P3 for RGBW/RGBVVVV products
– P4 for RGB products, use an RGBW controller and don’t connect the wire W
– P5 for a single color LED product, use an RGBW controller, and don’t connect
the wire R. G, B – P6 for RGB+CCT(warrnwhite+coldwhite) products
– P7 for CCT(warmwhite+coldwhite) products Connection with Gateway:
- Connect the LED product to the controller see section ‘Wire connection’.
- Start the device by searching on the ZigBee Light Link/ZigBee 3.0Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset.
- The Gateway found your device and you can assign it to the different rooms/zones/groups.
- Now you can use the device.
Reset:
- Switch on your device.
- Now switch off and on within 2 seconds.
- Repeat off/on four times.
- Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.
Please check the Compatibility Chart showing what gateways and how our products work with, this chart just shows the gateways we test, we will keep updating it. Welcome to check with our sales and website.
RGB+CCT Remote Control (GL-RC-006Z)
This manual describes RGB+CCT remote control used for our RGB+CCT products.
Remote control can control the LED lights up to six different Zones, change
the color, dim/brighten the lights, warm/cool white, and different programs.
In this manual, you will learn.
How to link & use with remote control
- Within 3 seconds after power-on, click the “on” button of the group to conduct code matching, and the LED light turns green, indicating successful code matching.
- Long press the “off” button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time.
- long-press the small moon key to enter the 60 seconds delay shutdown state.
- Long press the M key to enter automatic mode.
How to unlink
- 1f the LED is still connected to the ZigBee gateway, long-press the “on” button on the remote control within 3 seconds after power-on or press the button 5 times continuously, the light will flash for 5 times in the current color;
- 1f the LED is not connected in the ZIGBEE gateway state, long press the “on” button on the remote control within 3 seconds after power on or press the button for S times continuously, then the LED light will be fully bright and flashing for 5 times;
Mode description
Mode 1: Static warm light (warm light alone)
Mode 2: Static white light (cold light and warm light are equally bright)
Mode 3: Static cold light (cold light alone)
Mode 4: Static red light
Mode 5: Static green light
Mode 6: Static blue light
Mode 7: RGB fade-in fade-out (Color fade-in fade out from red to green, then
to blue, then to red, and so on, speed adjustable.)
Mode 8: RGB flash (Color flash from red to green, then to blue, then to red,
and so on, speed adjustable.)
Mode 9: Color breathing (In this mode, the brightness of current color will
cycle from 100%-096, then from 046-100%. At the same time, you can switch the
color and have a cycle repeatedly. Pressing switch /mode button to exit this
mode.)
Attention:
When you use LED Strip Light, please use the right LED Power Supply accordingly.
Compability Chart
Gateways Item| Philips Hue 1| Amazon Echo Plus 2| Smart Things
3| IKEA Tradfri
4| Homee
5| Smart Friends
6
---|---|---|---|---|---|---
RGB+CCT| Yes/la| Yes/la| Yes/la| Yes/la| Only/nut
RGB| Yes/Ja
RGBW| Yes/la| Yes/la| Yes/la| Only/nur
RGB| Yes/la| Only/nur
RGB
CCT| Yes/.la| Yes/la| Yes/la| Only
Dimmable| einzelfarbe
single color| Yes/la
Dimmer| Yes/la| Yes/la| Yes/la| Yes/la| Yes/la| Yes/la
1 2 are already tested by GLEDOPTO, 3 4 5 6 are from our customers, just for
your information, not verified by GLEDOPTO
GL-CP-I-002
Documents / Resources
|
GLEDOPTO GL-CP-I-002 Zigbee Controller Pro LED
Strip
[pdf] Instruction Manual
GL-CP-I-002 Zigbee Controller Pro LED Strip, GL-CP-I-002, Zigbee Controller
Pro LED Strip
---|---