INBAY 241320-01-1 Wireless Charging Tray Instruction Manual
- June 25, 2024
- INBAY
Table of Contents
241320-01-1 Wireless Charging Tray
Instruction Manual
241320-01-1 Wireless Charging Tray
Wireless Charging Tray
Cupra · Seat · Skoda · VW
Modelle mit Wireless Charging oder Koppelantenne ab Werk
*Models with wireless charging (OEM) or coupling antenna device (OEM)
INSTALLATION GUIDE
Wireless charging tray
An appropriate installation in observance of these operating instructions is
necessary. Please make sure the wiring is arranged so it is not bended or
crimped due to the risk of cable break. Make sure that all connections are
correct. Route the cable away from moving parts, do not allow the cable to be
entangled, pinched or damaged in any way.
We will not be liable for damage due to improper installation or utilization.
Use the specified accessory parts to prevent product failure.
Subject to technical modifications; no responsibility is accepted for the
accuracy of this information.
The “Qi” symbol is a trademark of the “Wireless Power Consortium”
Install Manual
INTEGRATED FOREIGN OBJECT DETECTION (FOD)
IMPORTANT INFORMATION:
Please don‘t place any other objects such as coins, credit cards etc. onto the
INBAY surface. Especially smartphones with attached ring stand holder must not
be used! – otherwise the integrated Foreign Object Detection (FOD) will
interrupt wireless charging for safetey reasons.
10W: 241320-01-2
Input Voltage| 12V (DC)
Output Voltage| 5V| 9V
Output Current| 1.1A| 1.2A
Output Power| SW| 10W
15W: 241320-01-2
Input Voltage| 12V (DC)
Output Voltage| 5V| 9V| 9V
Output Current| 1.1A| 1.2A| 1.6A
Output Power| SW| 10W| 15W
IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER‘S CAR.
© 2024 · acv GmbH · Straßburger Allee 10-12 · 41812 Erkelenz
www.inbay.systems
v2024-05-02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>