SIGMA BUSTER 150 Frontlight Headlight Instruction Manual

SIGMA BUSTER 150 Frontlight Headlight

Specifications:

• Model: BUSTER 150
• Mounting Options: Helmet Bracket, Silicone Bracket, Adapter for Action Camera Bracket
• Light Modes: High, Mid, Low, Night Flashing, Day Flashing
• Lumens: 150 (High), 75 (Mid), 35 (Low), 100/40 (Night Flashing), 40 (Day Flashing)
• Run Time: 3 hours (High), 7.5 hours (Mid), 14.5 hours (Low), 5 hours (Night Flashing), 25 hours (Day Flashing)
• IPX4 Rating

Product Usage Instructions

Mounting Options:

There are three mounting options available for the BUSTER 150:

1. Helmet Bracket: Securely attach the light to helmets with ventilation slots using the provided velcro strap.
2. Silicone Bracket: Adjust the light so that it does not blind other road users. Ensure it is securely attached to the bike and the light distribution is not obstructed.
3. Adapter for Action Camera Bracket: Follow the provided instructions for proper attachment to action camera brackets.

Using the Light Modes:

The BUSTER 150 offers 5 different modes:

• High
• Mid
• Low
• Night Flashing
• Day Flashing

To cycle through the modes, use the button as follows:

• 2 x short click: ON (Last Mode)
• + 1 x click: High
• + 1 x click: Mid
• + 1 x click: Low
• + 1 x click: Night Flashing
• + 1 x click: Day Flashing
• 1 x long click (2 sec): OFF

Mode Memory Function:

The BUSTER 150 features a mode memory function that remembers the last used mode for convenience.

FAQ

• Q: Is the BUSTER 150 waterproof?
  • A: The BUSTER 150 has an IPX4 rating, making it resistant to splashing water.
• Q: Where can I find detailed tutorials for the BUSTER 150?
  • A: Detailed tutorials and application tips can be found at goto.sigmasport.com/buster150/service.

MOUNTING

SILICONE BRACKET

Adjust the BUSTER 150 so that it does not blind other road users. The BUSTER 150 must be securely attached to the bike and light distribution must not be obstructed

ADAPTER FOR ACTION CAMERA BRACKET

5 MODES

VIDEO TUTORIALS

Detailed tutorials and application tips can be found at this link.

• goto.sigmasport.com/buster150/service

MODE MEMORY FUNCTION

PRESET MODE PROFILES

PROFILE SELECTION:

You can adapt your BUSTER 150 individually to your requirements. For this purpose, the lamp has 5 different profi les that you can select as follows. Hold down the ON/OFF button for longer than 5 seconds when it is switched off, then you will get to the profi le selection. The lamp fl ashes once for profi le 1, twice for profi le 2 and so on. To select the desired profi le, press the ON/OFF button once. Your selection is confi rmed by four short fl ashes of the front LED.

BATTERY INDICATOR

NOTE: If the battery capacity is less than 20 %, the red indicator LED lights up and after about 45 minutes, the red LED begins flashing, and the BUSTER 150 goes out completely shortly thereafter.

CHARGING

• The lamp needs to be charged at room temperature. (Charging temperature: +10 °C to +45 °C) (50 °F to 110 °F)
• Ensure that the USB sealing marked red is always closed correctly after charging
• No energy can be transferred out through the USB-C connection.

CHARGING INDICATOR

TECHNICAL DATA

• Charging Temperature:
  • +10°C to +45°C
  • 50 °F and 110 °F
• Battery Type:
  • 3.7 V, 1000 mAh
• Max power:
  • 2 W
• Water and Dust rating:
  • IP44

MOUNTING OPTIONS

HELMET BRACKET

With one velcro strap  Optimal mounting option for helmets with parallel ventilation slots.

With two velcro straps  Alternative mounting option for helmets with ventilation slots shown on the right

MOUNTING

The desired position of the bike light can be locked by tightening the screw .

• goto.sigmasport.com/busterhelmet/video

SIGMA-ELEKTRO GmbH hereby declares that the BUSTER 150/HL comply with the fundamental requirements and other relevant regulations of Directive 2014/30/EU and RoHS Directive 2011/65/EU. You can find the CE declaration at:

ce.sigmasport.com/buster150, ce.sigmasport.com/buster150hl

FCC Statement

FCC DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifi cations could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 5 millimetres between the radiator and your body.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Radiation Exposure Statement:

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.

UKCA STATEMENT

We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards, in accordance with the Electromagnetic Compatibility Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified.

WARNING

Possibly dangerous optical radiation! Never look directly into the lamp or point it at other people‘s eyes while it is in operation. It is essential to observe the further safety instructions in the enclosed sheet, especially regarding the safe use of the lighting

SIGMA-ELEKTRO GmbH

• Dr.-Julius-Leber-Straße 15
• 67433 Neustadt / Weinstraße
• Germany
• kundenservice@sigmasport.com

ACCESSORIES

Please visit sigmasport.com for available accessories

• https://cutt.ly/NwGODTIf

References

• goto.sigmasport.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>