MEEC TOOLS 012194 Thread Repair Kit Instruction Manual
- June 4, 2024
- MEEC TOOLS
Table of Contents
012194 Thread Repair Kit
Instruction Manual
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Jula reserves the right to make changes.
For the latest version of operating instructions, see
www.jula.com
SAFETY INSTRUCTIONS
Wear safety glasses when drilling – the risk of eye damage.
TECHNICAL DATA
| Thread insert | Length |
|---|---|
| MS x 0.8 | 4.55 mm |
| M6 x1.0 | 5.55 mm |
| M8 X 1.25 | 8.35 mm |
| M10 X 1.5 | 10.95 mm |
| M12 x 1.75 | 11.35 mm |
DESCRIPTION
Set with 110 stainless steel thread inserts (metric) and 20 installation parts
for repairing damaged or worn threads (M5-M12).
Extra thread inserts and tap holders/tap wrenches can be bought in Jula
department stores or at www.jula.com.
- Depth adjustment collar
- Installation tool
- Drill
- Tap
- Thread inserts
FIG. 1
USE
IMPORTANT:
Be careful when using thread inserts in engines, for example when repairing
threads for spark plugs, so that the tang (A) does not go into the engine.
-
Start by drilling out the remains of the damaged thread or screw with a suitable size of a drill (3).
-
Fit the selected tap (4) in a suitable tap holder/tap wrench (sold separately in Jula department stores and at www.jula.com) and make new threads as deep as necessary to ensure that the replacement thread (5) does not extrude over the surface of the threaded hole.
NOTE:
Use a suitable cutting fluid and twist back the tap half a turn for each full turn clockwise to ensure that the threading is effective.
For blind holes, set the position for the depth adjustment collar (1) on the installation tool (2) so that the tap does not seat and stick out over the upper surface of the threaded hole.
Make sure that the thread insert tang (A) comes in the slot in the installation tool (2).
FIG. 2 -
Twist the insert in the hole to the required depth and remove the installation tool (2).
-
Use a suitable punch and hammer to remove the tang.
MAINTENANCE
CLEANING
Wipe the tools and thread inserts after use to clean them from oil, dirt, and
shavings. Do not wash with a degreaser.
STORAGE
Store the parts in the metal box.
JULA AB, BOX 363, SE-532 24 SKARA
2022-01-13
© Jula AB
Documents / Resources
| MEEC
TOOLS 012194 Thread Repair
Kit
[pdf] Instruction Manual
012194, Thread Repair Kit, 012194 Thread Repair Kit, Thread Repair, Repair Kit
---|---