CREATE Mini Lint Remover User Manual
- June 8, 2024
- CREATE
Table of Contents
Mini Lint Remover
LINT REMOVER QUITAPELUSAS
USER MANUAL
Mini Lint Remover
Thank you for choosing our lint remover. Before using the appliance, and to
ensure the best use, please read these instructions carefully.
The safety precautions in this document reduce the risk of death, injury, and
electric shock if followed correctly. Please keep the manual in a safe place
for future reference, along with the completed warranty card, purchase
receipt and packaging. If applicable, please pass these instructions on to the
next owner of the appliance. Always follow basic safety precautions and
accident prevention measures when using an electrical appliance. We assume no
liabili- ty for the customer’s failure to comply with these requirements.
SECURITY INSTRUCTIONS
Before using this appliance, the following basic pre- cautions should always be followed:
-
To prevent damage while using the device:
-
Prevent clothes from folding.
-
Make sure the clothes are smooth before wearing.
-
Do not press hard while using the lint remover, just gently press on the outside of the garment.
This appliance should not be used over the clothes you are wearing, otherwise it may cause damage to your body and your clothes. -
Please turn off the lint remover immediately if there is any damage or failure, and do not assemble or disas- semble it without authorization.
-
Keep the power off during cleaning and maintenance of this product.
PARTS LIST
- Top
- Aluminum mesh
- Blades
- Waste deposit
- Engine body
- Brush
- USB charger
BEFORE USING
Before using the product, check that there are no foreign objects or objects
stuck to clothing, in which case remove them.
Pay attention to the following parts or areas:
MODE OF USE
- Turn on the lint remover.
- Slide the lint remover back and forth over smooth clothes.
Eliminate stubborn fluff
- Slide perpendicular and parallel, and follow the lines of the clothes.
The lint remover has a protection function, be sure to tighten the outer foil, otherwise it cannot be started.
Fine clothes
- Fold the garment to avoid damaging the finer layers of the fabric and place it on the ironing board to remove the lint.
Clothes with protruding parts
- Go over it with the lint remover.
Patterned areas
- Slide along the direction of the pattern.
Do not remove the storage container unless you are going to clean it, otherwise it may cause bodily injury or mechanical damage.
Do not use it to remove lint from silk stockings, otherwise it may cause suction damage to the blades.
CHARGE THE BATTERY
- If the battery power of the lint remover is insufficient, put it on charge.
- Make sure the product is closed before putting it on charge.
- Insert the charging cable interface into the machine, connect the USB to a computer, and the charging indicator will light up.
- The normal charging time of the lint remover is about 7 hours, and the use time is 50 minutes.
CLEANING
- Turn off the device.
- Unscrew the lint remover cap by turning counterclockwise and use the clean-ing brush to clean the lint in the storage container.
- Unscrew the outer foil by turning it counterclockwise.
- Remove the blades and the spindle.
- Use the cleaning brush to clean the outer foil.
- Use the cleaning brush to clean the lint inside the frame of the product.
- Replace the blade, spindle, outer foil, and cap in reverse order.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable re-use of material resources. To return your used device, please use the return and collection systems or contact the retailer from where the product was purchased. They can take this product for environmental safe recycling.
CREATE
Documents / Resources
|
CREATE Mini Lint
Remover
[pdf] User Manual
Mini, Lint Remover, Mini Lint Remover, Remover
---|---