Schreder Tflex Module Instruction Manual
- June 8, 2024
- Schreder
Table of Contents
Schreder Tflex Module
INSTALLATION INSTRUCTIONS
SYMBOLS
REMOTE MOUNTING
5P CONNECTOR
CONNECTOR PIN#| Circuit 1
1
2
3| Circuit 2
4
5| Earth
FIXED BRACKETS
SUSPENDED SWIVELING FIXATION, PULL OUT
SUSPENDED SWIVELING FIXATION, ADJUSTABLE
WALL SWIVELING FIXATION, PULL OUT
WALL SWIVELING FIXATION, ADJUSTABLE
HOOK FIXATION
Adjust hooks following cable tray size W100 – 400mm for standart version and 100-400 mm for custom or studio request.
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
Always switch off the power prior to installation, maintenance or repair
activities.
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from this
product. Do not stare at the luminaire when operating as it may be harmful to
the eyes. The luminaire should be positioned so that prolonged staring at the
luminaire at a distance of less than 0.77m is not expected.
This product contains a light source of an energy efficiency class G or
higher.
In case of PVC insulated mains cable, the installer
MUST ensure that the WHOLE cable is protected against climatic conditions,
especially
UV rays and rain, by making sure that the cable is contained inside the
luminaire and pole
Y-connection: In case of damage to the wire,it has to be replaced only by the
manufacturer,distributor or by an expert, to avoid risks.
Copyright © Schréder S.A. 2022 – Executive Publisher: Stéphane Halleux – Schréder International Services sa – B-4000 Liége, Rue de Mons 3 (Belgium) – The information, descriptions and illustrations herein are only of an indicative nature and subject to changes without notice.