Jourtech A1 Personal Alarm Item Locator User Guide

Jourtech A1 Personal Alarm Item Locator

Product Information

The device complies with part 15 of the FCC Rules. It has been evaluated to meet general RF exposure requirements. The device must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

Product Usage Instructions

When using the device, ensure that it does not cause harmful interference. If you experience interference, ensure that the device is accepting any interference received, including interference that may cause undesired operation.

Please note that any changes or modifications to the device not explicitly approved by the manufacturer could void your authority to operate this equipment. Thus, do not make any changes or modifications to the device without the manufacturer’s explicit approval.

Product Structure

Getting Started

Power On / Off

• Press the Function Button three seconds to turn on, it should beep once indicating it is powered on.
• To power off, hold the same button for at least 3 seconds. You will hear 2 beeps indicating your Personal Alarm is powered off.

Check For Updates

• To use the Apple® Find My® app to locate this item, the latest version of iOS®, iPadOS®, or macOS®, is recommended. The Find Items app on Apple Watch® requires the latest version of watch OS®.

Personal Alarm Function

• Pull the pin from the top of the product, can immediately trigger the 130dB siren and the red and blue lights start to flash.
• Insert the pull ring, turn off the siren and lights.

LED Flashlight

• Click the function button, you can turn on the led flashlight.
• Click the function button again, turn off the led flashlight.

Charging

• First, turn off the product (Press the Function Button three seconds).
• Then, pull the pin from the top of the product, expose the USB charging port and plug in the charging cable to charge (Picture 2).
• During charging, the green indicator flashes, and the green indicator stays on after full charge.
• After charging, insert the pull ring, and the product can be used normally (The product has been turned on during the charging process, so there is no need to restart it).

Add Your Personal Alarm

Start the App

• Open Find My app on your supported iPhone or iPad.
• Allow notifications from the app.

Connect your Personal Alarm

• Power on your Personal Alarm
• In Find My app, select the “Items” tab
• Tap “Add Item” then tap “Other Supported Items”
• Once your Personal Alarm is located, tap “Connect”
• Choose a recognizable name and emoji for your Personal Alarm and tap “Continue”
• Find My™ will ask for confirmation to add your Personal Alarm to your Apple ID – tap “Continue”
• Tap “Finish” and your Personal Alarm will be set up and ready to be connected to whatever item you wish to locate, e.g. your keys.

Locate Your Item

Find Personal Alarm when it is Nearby

• Open Find My app and select the “Items” tab, or open the Find Items app on your Apple Watch.
• Tap on your Personal Alarm from the list.
• Tap “Play Sound” to make your Personal Alarm beep.
• Tap “Stop Sound” to stop the beeps once you find your item.

Find Personal Alarm’s Last Known Location

• Open Find My™ app and select the “Items” tab, or open the Find Items app on your Apple Watch.
• Tap on your Personal Alarm from the list.
• Your Personal Alarm’s last known location will appear on the map as the emoji you chose during set up
• To navigate to that last known location, tap “Directions” to open the Maps app

Find Item When Out of Range

Enabling “Notify When Left Behind”

• Open Find My app and select the “Items” tab, or open the Find Items app on your Apple Watch.
• Tap on your Personal Alarm from the list.
• Under “Notifications”, enable the “Notify When Left Behind” toggle.
• You will receive a notification when you leave your Personal Alarm behind and it’s no longer in range of your device.

Enabling “Notify When Found”

• Under “Notifications”, enable the “Notify When Found” toggle.
• When your Personal Alarm is seen by another Find My enabled device, you will receive a notification of its updated location.
• Note: “Notify When Found” can only be activated when your Personal Alarm is out of range.

When Your Item is Lost

Enabling “Lost Mode”

• Open Find My app and select the “Items” tab, or open the Find Items app on your Apple Watch.
• Tap on your Personal Alarm from the list.
• Under “Lost Mode”, tap “Enable”.
• A screen detailing Lost Mode will pop up, tap “Continue”.
• Enter your phone number or email address and tap “Next”.
• You may enter a message that will be shared with the person that finds your item.
• Tap “Activate” to enable “Lost Mode”.
  Note: When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
  Note: When “Lost Mode” is enabled, your Personal Alarm is locked and cannot be paired to a new device.

Resetting Your Personal Alarm

Remove the Personal Alarm from Find My app

• Open Find My app and select the “Items” tab.
• Tap on your Personal Alarm from the list.
• Please ensure “Lost Mode” is disabled.
• Scroll to bottom of the screen and tap “Remove Item”.
• A summary will open, tap “Remove” to confirm.

Factory Reset Your Personal Alarm

• After successfully removing the Personal Alarm from Find My™ app, press the Personal Alarm’s function button four times rapidly, you will hear a beep each time you press it and then hold it a fifth time until you hear a ringing chime.
• The Personal Alarm is now reset and ready to be paired to a new device.

Unwanted Tracking Detection

If your iPhone detects that an unknown Personal Alarm is traveling with you, it will send you a notification. A sound will start playing so you will be able to find it. These alerts are only activated when an Personal Alarm is no connected to its owner’ s phone, so your partner’s Personal Alarm will not trigger a sound if they are with you.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

Contact US
If you encounter issues in using this product, please feel free to contact us, we will deal with any issues as soon as possibly we can. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

The Fine Print

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the user’ s authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that on RF exposure calculation is needed.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect het equipment into an outlet on a circuit different from that to which the receiver is connected.

The Apple Find My network provides an easy, secure way to locate compatible personal items on a map using the Find My app on your iPhone®, iPad®, or Mac®. Simply pair your compatible product with the Apple Find My app to view it right alongside your Apple devices. If your item ever goes missing, you can put it in Lost Mode to display a message and contact information to anyone who might find it. The Find My network is encrypted and anonymous, so no one else, not even Apple or the maker of your personal item, can view its location.

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>