KYUNGWOO SMK-HXV Flip Key Tag User Manual
- June 6, 2024
- KYUNGWOO
Table of Contents
KYUNGWOO SMK-HXV Flip Key Tag User Manual
Revision History
Rev.| | |
---|---|---|---
1.0| 2020.02.11| First Release| Park Jeguk
| | |
| | |
Synopsis
This document is specifically-written manual for receiver and transmitter (FLIP KEY TAG) of wireless communication, which is to confirm user identifications under engine start limiting function in heavy equipments.
FLIP KEY TAG is defined as following: it receives signals with RFID 125 KHz and wakes up. After then, it transmits password-secured information to SMK Reader by using 433 MHz wireless signals.
**WARNING**
Exchanging batteries in incorrect way, It may cause explosion Discard used batteries according to manufacturer’s instructions.
Product Image
-
External Appearance
-
Dimension
-
Certification LABEL location
-
Block Diagram
Specification
- Operating Specification
- Must wake up the remote control by providing electricity with RFID 125 KHz.
- Must be operating with CR2032 battery.
- Must be able to transfer password-secured signals.
- Must be able to u e Single channels with band of 433MHz.
- Power Specification
- 3 V d.c. (CR 2032 Lithium Battery)
- Notice : Inserting opposite polarity of battery may cause explosion or damage to product (Please match battery polarity with battery holder)
- General Specification
- Storage Temperature: -20℃ ~ 70℃
- Operating Temperature: -10℃ ~ 60℃
- Water-Proof Specification: IP54 (Living Water-Proof)
- Material of Device : Injection Molding (Material: XR401-9001, Flame Class : HB, Manufacturer : LG Chem)
- PCB Material :
object/part No.
| manufacturer/ trademark| Layer /T h ickness| Flame Class| UL No.|
mark(s) of conformity1)
---|---|---|---|---|---
SMK TAG B/D PCB
| JM ELECTRONICS CO LTD| 2Layer /0.8T| V-0|
E117655
|
RF Specification
Item|
Specification
---|---
Wireless Data Communication System| Frequency Range| 433.050 MHz ~
43 .790 MHz
Operating Frequency| 433.96 MHz (Single Channel)
RF Power| Under 1 mW
Modulation Method| GFSK
Operating Temperature| -10 ~ +60℃
Magnetic Induction System| Frequency| 125KHz (Single Channel)
RF Power| Receive O ly
Modulation Method| ASK
Product label Explanation of graphic symbols used
Symbol
|
escription
---|---
| Korea Certification Marking
| Communaute Europeenne Marking
| Electrical waste and electronics equipment
| Direct current
Postal address
Kyungwoo Systech Inc.
Office: +82-2-985-8085
401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South
Korea
E-mail: [email protected]
This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RED Compliance Statement
This product is CE marked according to the provision of the RED (2014/53/EU). Hereby Kyungwoo Systech, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU
References
- Web hosting, domain name registration and web services by 1&1 Internet
- WooCommerce - Sell Online With The eCommerce Platform for WordPress