STAGEWORX BLS-315 Pro Lighting Stand B Kit User Manual
- June 6, 2024
- STAGEWORX
Table of Contents
STAGEWORX BLS-315 Pro Lighting Stand B Kit
General information
This manual contains important instructions for the safe operation of the
product. Read and follow the safety instructions and all other instructions.
Keep the manual for future reference. Make sure that it is available to all
those using the product. If you sell the unit, please make sure that the buyer
also receives this manual.
Our products and user manuals are subject to a process of continuous
development. We there‐fore reserve the right to make changes without notice.
Please refer to the latest version of the user manual which is ready for
download under www.thomann.de.
Further information
On our website (www.thomann.de) you will find lots of further information and details on the following points:
| Download | This manual is also available as PDF file for you to download. |
|---|---|
| Keyword search | Use the search function in the electronic version to find the |
topics of interest for you quickly.
Online guides| Our online guides provide detailed information on technical
basics and terms.
Personal consultation| For personal consultation please contact our technical
hotline.
Service| If you have any problems with the device the customer service will
gladly assist you.
Notational conventions
Instructions
This manual uses the following notational conventions:
The individual steps of an instruction are numbered consecutively. The result
of a step is indented and highlighted by an arrow.
Example:
- Switch on the device.
- Press [Auto].
- Automatic operation is started.
- Switch off the device.
Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
CAUTION!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it is not
avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage
if it is not avoided.
Safety instructions
Intended use
This speaker / light stand is used for stable fixing and height-adjustable
installation of loud‐speaker cabinets and lights. Use the product only as
described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use.
This product may be used only by persons with sufficient physical, sensorial,
and intellectual abilities and having corresponding knowledge and experience.
Other persons may use this product only if they are supervised or instructed
by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not
in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like)
from the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand
may tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may
tip over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specified for the stand.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC floor and
after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use
felt-pad floor protectors or a carpet.
Features
Professional speaker and light stand
- Material: Steel / magnesium compound
- Individually reinforced legs for high stability
- Height: 150 to 310 cm
- Stand space diameter 120 cm
- Pipe diameter: 28 mm
- 35 mm adapter for suitable speaker box
- 28 mm adapter with M8×15 thread for single mounting of a spotlight (item no. 293511)
- Centric load capacity up to 30 kg
- Optional accessories:
- Cross beam 100 cm (Item no. 293501)
- Cross beam 120 cm (Item no. 293504)
- Bag (item no. 293512)
- Made in Europe
Operating
Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand
may tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may
tip over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specified for the stand.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your parquet, linoleum, laminate or PVC floor and
after some time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use
felt-pad floor protectors or a carpet.
Comply with regulations
When installing and operating, make sure to follow the standards and
regulations that apply in your country.
Setup
- Unfold the feet of the tripod until the cross braces are in a horizontal
- Fix this position with the safety screw on the slider to which the three feet are
- Pull out the two safety pin and loosen the two safety screws on the extension
- Pull out the upper extension tube to the desired height and slide the safety pin through the corresponding grid
- Fix the position of the upper extension tube with the safety screw on the upper tube
- Pull out the lower extension tube to the desired height and slide the safety pin through the corresponding grid
- Fix the position of the lower extension tube with the safety screw on the lower tube
- Mount a spotlight or a speaker box. If necessary, screw one of the supplied adapters firmly to the upper extension Observe the instructions of the respective manufac‐ turers. The maximum load capacity of 30 kg in total must not be exceeded.
Dismounting
- Remove spotlight or speaker
- Pull out the safety pin on the lower extension
- Loosen the safety screw on the lower tube clamp and slide the lower extension tube all the way
- Tighten the safety screw on the lower tube
- Pull out the safety pin on the upper extension
- Loosen the safety screw on the upper tube clamp and slide the lower extension tube all the way
- Tighten the safety screw on the upper tube
- If necessary, take off the
- Loosen the safety screw on the slider to which the three feet are
- Fold up the feet of the
- Pack all parts of the system in their original package, as possible, and store the package in a dry place protected agains
Technical specifications
| Height, max. | 3.10 m |
|---|---|
| Adjustable tripod height | 1.50 m … 3.10 m |
| Floor space | Æ 1.20 m |
| Tripod tube diameter | Æ 28 mm |
| Holder type | Flange, Æ 35 mm |
Adapter, Æ 35 mm/36 mm
Adapter, Æ 28 mm, M8×15 thread
Load, max. (with centric load)| 30 kg
Transport dimensions (W×H×D)| 137 mm × 1290 mm × 131 mm
Weight| 6.1 kg
Colour| black
Further information
| Stand type | Lighting stand |
|---|---|
| Incl. crossbar | No |
| Crank | No |
| Material | Steel-magnesium compound |
Protecting the environment
Disposal of the packaging mate‐rial
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the notes and
markings on the packaging.